Hello, I was recently given this tv by a family member.
model LUXOR LUX0150004 01
screen VES500UNDA 2D N03
Power 17IPS71
MB 17MB95
TCON T420HVN06.3 CTRL BD 42T34-C03
I have only carried out basic repairs to tvs in the past. Changing capacitors and LEDs ect. And have not yet come across this fault.
The backlights light, the tv responds to the remote indicating the software is ok but no picture. Always a blank screen.
As per the advice on other similar threads I removed and cleaned the contacts on the LVDS cable to no avail. I have also attempted to remove each of the 2 ribbon cables coming out of the TCON board to still have the same blank screen.
I am thinking I have a panel fault or a faulty TCON board. I have no idea how to identify the small components on there or how to test / verify this.
Please see attached pictures of the TCON board.
Any advice is greatly appreciated, Thanks.
model LUXOR LUX0150004 01
screen VES500UNDA 2D N03
Power 17IPS71
MB 17MB95
TCON T420HVN06.3 CTRL BD 42T34-C03
I have only carried out basic repairs to tvs in the past. Changing capacitors and LEDs ect. And have not yet come across this fault.
The backlights light, the tv responds to the remote indicating the software is ok but no picture. Always a blank screen.
As per the advice on other similar threads I removed and cleaned the contacts on the LVDS cable to no avail. I have also attempted to remove each of the 2 ribbon cables coming out of the TCON board to still have the same blank screen.
I am thinking I have a panel fault or a faulty TCON board. I have no idea how to identify the small components on there or how to test / verify this.
Please see attached pictures of the TCON board.
Any advice is greatly appreciated, Thanks.
Comment