Dose anyone know what would cause this issue because I do not understand what is going on
The setup is the hard drive is set to never turn off
The video set to not turn off
Supposedly it setup is not to power down at all but something is not working correctly
I have three of these computers and the other two work correctly with this setup
The video is on the screen but the keyboard has no lights on and no response the mouse light is on but no response to movement
The power button does not respond correctly either because if you push it monetary the hard drive lights but as you release the button no response unless you hold the power button for a very long time then it power down but when you push the power button again the power light comes on but does not boot up correctly unless you power cycle it several times before it might boot up again and everything seems to be ok until it has been on several hours and lock up again
Also sometimes it does not show the HP logo like it suppose to and it seems to take a long time to boot up to where the hard drive light is not lighting
This switching power supply has been recapped a year or so ago so I know that this could not be the issue
The computer has Windows 10 professional install on it but it is an upgrade because it originally started with Windows 7 professional
One note this the computer that I posted a while back that the power LED light was not working and I had installed a new red LED light in it
The setup is the hard drive is set to never turn off
The video set to not turn off
Supposedly it setup is not to power down at all but something is not working correctly
I have three of these computers and the other two work correctly with this setup
The video is on the screen but the keyboard has no lights on and no response the mouse light is on but no response to movement
The power button does not respond correctly either because if you push it monetary the hard drive lights but as you release the button no response unless you hold the power button for a very long time then it power down but when you push the power button again the power light comes on but does not boot up correctly unless you power cycle it several times before it might boot up again and everything seems to be ok until it has been on several hours and lock up again
Also sometimes it does not show the HP logo like it suppose to and it seems to take a long time to boot up to where the hard drive light is not lighting
This switching power supply has been recapped a year or so ago so I know that this could not be the issue
The computer has Windows 10 professional install on it but it is an upgrade because it originally started with Windows 7 professional
One note this the computer that I posted a while back that the power LED light was not working and I had installed a new red LED light in it
Comment