Announcement

Collapse
No announcement yet.

dell 1558 fm9b mainboard

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    dell 1558 fm9b mainboard

    hi
    have a studio 1558 (FM9B MAINBOARD )
    no power but does charge battery ,anyone have any suggestions or better still a schematic (must be fm9b not fm9)
    andrew

    #2
    Re: dell 1558 fm9b mainboard

    power adapter or power jack. Dells like yours use two power rails, one to charge, one to run
    Cap Datasheet Depot: http://www.paullinebarger.net/DS/
    ^If you have datasheets not listed PM me

    Comment


      #3
      Re: dell 1558 fm9b mainboard

      dont think it is power socket as the always 5v and 3.3v are working

      Comment


        #4
        Re: dell 1558 fm9b mainboard

        Originally posted by pwll computer services View Post
        hi
        have a studio 1558 (FM9B MAINBOARD )
        no power but does charge battery ,anyone have any suggestions or better still a schematic (must be fm9b not fm9)
        andrew
        My laptop have similar problem but on battery there is no 3.3v and 5v alw could you please share your experience if you have fixed this problem.
        Last edited by bucephalus; 03-03-2016, 04:52 AM.

        Comment


          #5
          Re: dell 1558 fm9b mainboard

          Check continuity of power button cable.

          Comment


            #6
            Re: dell 1558 fm9b mainboard

            Originally posted by diif View Post
            Check continuity of power button cable.
            Hi
            Thanks for the quick reply
            I have tested miniature tact switch and the cable. they are good and shows continuity. When I press the power button led on the button blinks for 1/2 second then nothing happens. The Charger is working properly and charging the battery. On battery connector 12 volts are present and the charging jack led turns on. I request you to kindly read the complete problem as I have posted it here https://www.badcaps.net/forum/showpo...3&postcount=13

            Comment


              #7
              Re: dell 1558 fm9b mainboard

              Originally posted by diif View Post
              Check continuity of power button cable.
              The power switch have 2.7v instead of 3.3v.

              Comment


                #8
                Re: dell 1558 fm9b mainboard

                Motherboard have +3v_alw and +5v_alw when connected to AC Adapter but +15w_alw is absent i am unable to understand why? I have checked several components but i am unable to locate the faulty one. please help.
                Attached Files

                Comment


                  #9
                  Re: dell 1558 fm9b mainboard

                  Pls I also have issue with the same board.
                  It doesn't power.
                  I have 19v at the gate of the second MOSFET instead of 3.3
                  And the LDO is not present at the pin 21 of the charging ic (pu4) and I've changed the ic still no changes.
                  Kindly help me sir

                  Comment


                    #10
                    Re: dell 1558 fm9b mainboard

                    Measure and post the voltage readings for:

                    DCIN

                    LDO


                    pins on the MAX8731A (PU4). The LDO does not have an enable pin so it should be always ON.

                    Comment


                      #11
                      Re: dell 1558 fm9b mainboard

                      Dcin 19v
                      ldo 0v

                      Comment


                        #12
                        Re: dell 1558 fm9b mainboard

                        Remove all power.

                        Meter in resistance mode. Check the resistance to ground of the LDO pin.

                        What is the measurement and meter scale?

                        Comment


                          #13
                          Re: dell 1558 fm9b mainboard

                          Thanks for glur great response sir.
                          Resistance to grand of LDO pin is 641

                          Comment


                            #14
                            Re: dell 1558 fm9b mainboard

                            What is the meter scale?

                            The measurement is 641 ohms ?

                            That is a low reading for the LDO rail. Confirm it.

                            Consider the remove the capacitor on this rail and check if the resistance changes to a higher value.

                            Comment


                              #15
                              Re: dell 1558 fm9b mainboard

                              After removing the two capacitors connected to the LDO rails.
                              The reading changed to 632 ohms

                              Comment

                              Working...
                              X