Willem PCB 5.0E Software??

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • samtron786
    Senior Member
    • Aug 2016
    • 154
    • germany
    #1

    Willem PCB 5.0E Software??

    Hello
    I am looking for the program for PCB 5.0E so that I can write the Winbond 25Q128FV chip, can I write the program or not ???
    Thanks very much
    Tags: None
    • samtron786
      Senior Member
      • Aug 2016
      • 154
      • germany
      #2
      Re: Willem PCB 5.0E Software??

      can you also delete read and write with PCB 5.0E Bios chip 1.8 volts??
      Thanks

        Comment

        • samtron786
          Senior Member
          • Aug 2016
          • 154
          • germany
          #3
          Re: Willem PCB 5.0E Software??

          25q64fwsig 8m 1.8v

            Comment

            Previous template Next

            Related Topics

            Collapse
            • araxnido
              Programming KBC IT8987VG ASUS TUF FX506L RT809F+PEB
              by araxnido
              Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.

              When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which...
              06-10-2025, 09:26 PM
            • ChaosLegionnaire
              bug of the month: write caching setting for the hard drive in device manager
              by ChaosLegionnaire
              i recently bought a new wd re4 2tb with 2014 datecodes. when i got around to testing it tho in victoria hd tester, the write speed was very slow at 14 mb/s with a 256 sector transfer size. when i increased the transfer size to 1024 sectors, the write speed increased slightly to 44 mb/s. read speeds and sector verify speeds were fine and at normal speeds.

              so i just ass-u-med the drive's poor performance was due to it being an advanced format drive and i was using it on winxp. when i tried cloning my system disk to this wd re4 2tb drive and writing to it in linux, the write speed...
              10-06-2019, 01:39 PM
            • SMDFlea
              Copy DMI info easily with Hex editing software and Macro script
              by SMDFlea
              Copying DMI information from an old bios to a new one is difficult for some members, often they have no experience with a hex editor,or some that have tried find it too hard.There is an option to make things easier for those members so that they don`t need to post their own bios backup for the DMI copying.

              Experienced bios modding members can help by posting in other threads the DMI offsets,macro script generated by the software and a download link to the software at softpedia mentioned in this guide,or post your macros in the comments here with a link to the bios request thread ....
              02-28-2023, 02:14 PM
            • modtool
              Problems writing MX25L25673G
              by modtool
              Hi to all, I'm facing a problem writing to an MX25L25673G SOIC-16 bios chip (part of an HP EliteOne 1000 G2 27") with a Willem programmer 5.0B (with software PCB98D12c4).
              I know my programmer is old and I've planned to buy a new one but it worked until now with every eeprom I've faced in different devices, this is the first time that is giving me this kind of problem and I need to urgently solve it because I've already changed the fried southbridge and cleaned its ME fw, so I need to finish the last step of the repair.
              This Willem supports some 256Mbit eeprom, I can choose between...
              04-02-2023, 11:56 PM
            • SMDFlea
              Common SPI bios chip programming Questions and Answers
              by SMDFlea
              Common SPI bios chip programming Questions and Answers
              ----------------------------------------------------------

              Q: I have a bios request,i can`t post my backup as i can`t read from the chip.

              A: If you can`t read from it how do you expect to write to it ?.

              Q: Why is my bios chip unreadable ?.

              A: The programmer is faulty or has a worn or broken zif socket.

              The USB cable is frayed,connector pins worn or some other physical damage.

              Not enough amperage or voltage to power the programmer properly.

              Bad...
              09-02-2021, 04:40 PM
            • Loading...
            • No more items.
            Working...