Is it possible to replace individual LED diodes for the backlights? I cannot find the strips anywhere. I have 2 of them and both LEDs went out in the same area, then some LEDs in another area get so hot it causes the panel to go dark until i shut it off for about 20 mins.
I tested the voltage in my second unit that has few bad LEDs.
26.4V at board to LED strip
114 diodes in the strip
Diode is 4.1mm (L) x 1.5mm (W)
The sticker on the back says model z27, the box says u27 and a third sticker shows u278w-4000r and then theres another sticker on the power/video board that shows u275w-4000r.
Thanks for any help
I tested the voltage in my second unit that has few bad LEDs.
26.4V at board to LED strip
114 diodes in the strip
Diode is 4.1mm (L) x 1.5mm (W)
The sticker on the back says model z27, the box says u27 and a third sticker shows u278w-4000r and then theres another sticker on the power/video board that shows u275w-4000r.
Thanks for any help
Comment