Working on an old HP 330B Distortion Analyzer that I really want to fix up, but it has a PCB warning on the back...
I'm guessing it's the 1uf 400v cap near the bottom center/right of the underside picture? Everything else looks like normal paper or electrolytic.
I hope it's not the transformer, because there is something oily underneath it. It is noticeable on the wires coming out of the transformer, and on the power cord beneath.
I'm guessing it's the 1uf 400v cap near the bottom center/right of the underside picture? Everything else looks like normal paper or electrolytic.
I hope it's not the transformer, because there is something oily underneath it. It is noticeable on the wires coming out of the transformer, and on the power cord beneath.
Comment