Behringer xenyx x1204usb mixer

[Thermaltake]

I assume this first one B50K would be ok to put in place of those two, right ?

[check12]

I assume this first one B50K would be ok to put in place of those two, right ?

Yes same as the already listed 6pin B50K with midpoint & 23mm shaft length for EQ etc ...

[Thermaltake]

AC10K came but they don't have midpoint lol

I wrote to seller

[Thermaltake]

Can I use that AC10K instead of B503 6pin ? They are both without center pin.

B50K link is now giving me 404 error

[check12]

Can I use that AC10K instead of B503 6pin ?

No.... AC pot has a completely different taper to a B pot.

They are obviously completely different values too. AC10K = AC103. ....

[Thermaltake]

ah, I will need new AC10K then with midpoint because this was for some reason without midpoint(center). I'll try and search it myself if you don't have time.

[Thermaltake]

I searched now on aliexpress but I can't find anything with midpoint AC10K 6pin 23mm shaft.


does it matter if there is no midpoint, will it work normally without it if I put them instead of this original ones ?

[check12]

Lol... The pot with or without the midpoint is exactly the same electronically. The little click is only guidance for extremely low light conditions or blind users... electronically there is no difference....

Just use the correct values in the correct places...