Viewsonic VS16217 strange problem - white flickering screen on power up

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • domu
    New Member
    • May 2014
    • 3
    • TH
    #1

    Viewsonic VS16217 strange problem - white flickering screen on power up

    As per subject, on power up display shows no image, but white
    flickering screen. Strangely, it only happen after power was lost
    when it was on. After power returns - white screen only, but if
    disconnect power for 12-24 hrs, and connect then again monitor
    works normally.

    Any clues how to go about it would be greatly appreciated.
    Tags: None
    • CapLeaker
      Leaking Member
      • Dec 2014
      • 8081
      • Canada
      #2
      Re: Viewsonic VS16217 strange problem - white flickering screen on power up

      Take a hair dryer and heat the board up to 40-50C and then turn it on. See what happens…

        Comment

        • domu
          New Member
          • May 2014
          • 3
          • TH
          #3
          Re: Viewsonic VS16217 strange problem - white flickering screen on power up

          Interesting! Surely will try.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • PantherDave
              Microsoft Surface Pro (5th gen) model 1796 - no power
              by PantherDave
              Hi all!

              I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

              I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
              https://www.badcaps.net/forum/troubl...-hardware-devi...
              05-29-2024, 02:01 PM
            • grimacelord
              HP 15-EH1070wm - Black Screen With Power LED.
              by grimacelord
              Hello,

              I have an HP 15-eh1070wm laptop that came to me for the same reasons I am starting this thread. The charging LED appears when the laptop power adapter is connected and the power LED appears when pressing the power button, but nothing appears on screen.

              First thing I did was take off the bottom panel and remove the battery and then press and hold the power button for 30 seconds and then reinstall the battery and power on. The fan spins and this time, the back light illuminates and a brief message appears on the screen for about 1 second saying something along like,...
              01-28-2023, 10:50 AM
            • Ado02
              Lenovo Thinkpad X1 Gen 10 - Flickering Screen
              by Ado02
              Hello everyone,

              We recently replaced the OLED screen on a Lenovo ThinkPad X1 Gen 10. After about a month, the replacement screen began to flicker. Initially, updating the Intel® Iris® Xe graphics driver resolved the issue for about a week. However, when the problem recurred, updating the driver again had no effect.

              The flickering only occurs once the system reaches the Windows login screen. Interestingly, if we disable the Intel GPU driver or connect the laptop to an external monitor, the flickering stops. We have tried installing two different replacement screens,...
              12-16-2024, 02:33 PM
            • joaquinmjuan
              Canon TS8350 Screen Freezes on Power On
              by joaquinmjuan
              Hello, I have a Canon TS8350 printer. The problem is that when I turn it on, "CANON" appears on the screen, but it never goes away. You can leave it on for a whole day, and it doesn't go away. Does anyone know how to fix this? I've tried unplugging it, but nothing. I've also tried holding down POWER, but nothing. In fact, once it turns on, it can't be turned off with the Power button. I've also held down Power and then plugged it into the Power supply, and the power light flashes once and doesn't turn on, but then when I press Power again, it turns on. Currently, it's a nearly new paperweight,...
              05-07-2025, 12:26 AM
            • sam_sam_sam
              Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
              by sam_sam_sam
              I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

              One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
              03-31-2024, 02:12 PM
            • Loading...
            • No more items.
            Working...