hp w2207h - died

[slayer200230]

Re: hp w2207h - died

also if these 2 caps are in parallel does it matter the order? looking at the bottom circuit it looks like these 2 are both tied between ground and positive, from the rectifier, ofc i could be wrong and would rather get it correct, also this board can be found all over the internet, just cant read the values of the caps
http://lcdalternatives.com/HP-W2207-...-P2378564.aspx

if anyone is interested maybe they can find the one picture that shows one of the 2 values

[slayer200230]

Re: hp w2207h - died

ok just got back to work where the resistors were, they are slightly diffrent sizes so i was able to match them up c819 is the 1000uf cap at 10v, whats great is i ordered 1200uf 16v caps and got 2200uf 10v caps instead. so my bad. c818 is the 1200uf 16v cap

[nasnus123]

Re: hp w2207h - died

HI
I have HP w2207h 22 inch LCD Monitor , power on but led blnking blue and orange ,I test power supply outputs they are 5v and 15V , there is no number on inverter chip Inverter Controller pin4 2.2v and 0v follow by led blinking , what could be the problem please replay me .

[nasnus123]

Re: hp w2207h - died

on pin 4 signal coming from logic board

[chumy]

Re: hp w2207h - died

Need EEprom HP W2207H