Announcement

Collapse
No announcement yet.

Squematic for ASRock ALiveNF6G-VSTA motherboard

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Squematic for ASRock ALiveNF6G-VSTA motherboard

    Hello friends:

    I need the Squematic for my ASRock ALiveNF6G-VSTA motherboard. I have searched for it in many webs that I have no luck.

    Thanks!

    Greetings.
    Tags: None
    #2
    Re: Squematic for ASRock ALiveNF6G-VSTA motherboard

    Hey fricka. I see your post on this site:

    http://www.tomshardware.com/answers/...dump-bios.html

    Trust me, and Louis Rossmann. That will NOT be solved by a reflow! If it works by heating it with a hair dryer-you need a new chip!

    Look up louis Rossmann's videos: "reballing is bullshit." He explains that a GPU has tiny wires that touch tiny bumps inside the chip. The heat you put on it was enough to make that wire move a touch the bump that it it supposed to touch for just a second.
    Disclaimer: Don't trust a thing I say-I am frequently wrong!!!

    I have tons of spare parts, some used, some N.O.S. ham transistors and caps. Message me if you need any parts.

    Some of the things I've fixed:
    60" Vizio-bad LED's. iBook G4: Resoldered VCC Plug. Geo Tracker ECU: Swollen / Leaking capacitors. Windows Laptop: Soldered broken LVDS wires. Dryer: Burned contact on temp switch. Oven in R.V.: Bad contacts in relays-Exploded by the looks of them! Samsung Oven: Burned contacts on Relays. MSI Motherboard: BSOD-Swollen capacitors, bad graphics card, Moved SATA Input from SATA 1 to SATA 2 plug

    Comment

      #3
      Re: Squematic for ASRock ALiveNF6G-VSTA motherboard

      Thank you for your response NeedsMoreflux!!

      Well I tried with the hair-dryer to test if the problem in my motherboard was a bad solder/conexion in the chipset chip. I know that this problem is best solved buying a new motherboard. Really I could boot correctly in only was ocassion. Then I tried to boot in several attents with no success. The next day I tried to do a reflow again. I turn on the motherboard but I didn't obtained video in the several ocasions that I tried.

      Greetings.

      Comment

      Previous template Next
      Working...
      X