HP EliteOne 800 G4 Base Model 23.8-inch Touch GPU All-in-One PC bios

[Zaraki7777]

Need bios for this PC
HP EliteOne 800 G4
DA0N31MB6H0 REV H
serial : AUD852058Q
Thanks

[hoaca388]

Re: HP EliteOne 800 G4 Base Model 23.8-inch Touch GPU All-in-One PC bios

Need bios for this PC
HP EliteOne 800 G4
DA0N31MB6H0 REV H
serial : AUD852058Q
Thanks

HP EliteOne 800 G4 Base Model 23.8-inch Touch GPU All-in-One PC

[Zaraki7777]

Re: HP EliteOne 800 G4 Base Model 23.8-inch Touch GPU All-in-One PC bios

Thank you, I will test it.

[hopkok]

Hi masters, can anyone help me to clean ME? I tried that with no success (ME analyzer, found right ME, use ME to to inplement it, nothing works) . Finally unit did not start at all, I had to flash back back ups... PCH has been shorted, so I replaced it, need to clean it. Maybe there is other problem with board, but I think ME region problem. Many thanks

HP EliteOne 800 G4
DA0N31MB6H0 REV H

[SMDFlea]

Serial number ? -> https://www.badcaps.net/forum/troubl...before-posting

[hopkok]

Hi, I was reading that, serial number was hardly visible if was looking at right place. Can it start something like CZN....? Let me have a look again, thanks.

[hopkok]

Serial number: CZC8357BC

SMDFlea sorry for breaking rules, had to have a look under scope...

[hoaca388]

Serial number: CZC8357BC

SMDFlea sorry for breaking rules, had to have a look under scope...

HP EliteOne 800 G4 Base Model 23.8-inch Non-Touch All-in-One PC
Serial : CZC83574BC

[hopkok]

You are right...Serial : CZC83574BC
Let me test it....

[hopkok]

Hi, its working, but on boot getting this error. Is it fixable? Many thanks anyway sir.

[hoaca388]

Hi, its working, but on boot getting this error. Is it fixable? Many thanks anyway sir.

Uplload ec file

[hopkok]

EC file

[hoaca388]

EC file

ZZZ

[hopkok]

Need to flash both?

[hoaca388]

Need to flash both?

Yes ..

[hopkok]

Yes ..

Hi, with this bioses unit not starting at all.
So now I made backups of both bioses before flashing. With these files, unit works with error, can you have a look on it one more time please? Thank you

[hoaca388]

Hi, with this bioses unit not starting at all.
So now I made backups of both bioses before flashing. With these files, unit works with error, can you have a look on it one more time please? Thank you

Try again .I'm so busy these days

[hopkok]

Will try, thanks a lot for help!

[hopkok]

Try again .I'm so busy these days

Hi, did not work, I finally used original EC file and your last main BIOS dump. Put DMI back right in BIOS after boot. All works well now.

Many thanks for help mate!!!

[shahrammohebbi]

try this