MSI Pro 24X 10M - Need Bios (bin file) please help !!

[foo007]

Hello Everyone. I need bios file. Please help.

Model: MSI Pro 24X 10M
Motherboard: MS-AEC21 Rev 1.0
CPU: Intel Pentium 6405u
Bios chip: (MX25L12872F)

Problems- turn on power only got screen backlight on few second will auto off/on repeat issue. no display input.

my english is not good hope can understand. 🙏 Thanks

[SMDFlea]

Post the PC serial number and your bios backups https://www.badcaps.net/forum/troubl...before-posting

[foo007]

Wow thanks for the quick response 🙏😃 appreciate it for help.

My own device bios was corrupted. So i do bios backup on my friend PC is exactly the same model and motherboard.

my own device S/N: MSAEC2K3S0103001

[hoaca388]

Wow thanks for the quick response 🙏😃 appreciate it for help.

My own device bios was corrupted. So i do bios backup on my friend PC is exactly the same model and motherboard.

my own device S/N: MSAEC2K3S0103001

PRO 24X 10M

[foo007]

PRO 24X 10M

Thank for help. 🙏
I have try flash you bios file. But still not work get different problems~ (just only have power), no display, no auto on/off, no screen backlight. 😢

[hoaca388]

Thank for help. 🙏
I have try flash you bios file. But still not work get different problems~ (just only have power), no display, no auto on/off, no screen backlight. 😢

Chech hardware

[foo007]

Chech hardware

Actually my own device last time is fine. because of last time I update bios download from MSI official website. after i update suddenly blank screen was corrupted. is was by my mistake.
So my hardware it was ok. 😐

https://my.msi.com/All-in-One-PC/PRO-24X-10M/support

[hoaca388]

I also download from MSI. https://www.msi.com/All-in-One-PC/PRO-24X-10M/support

Just change the extension to .bin.

[foo007]

I also download from MSI. https://www.msi.com/All-in-One-PC/PRO-24X-10M/support

Just change the extension to .bin.

have try still not working... 😐 no display input
also i want know if using NeoProgrammer flash need to set Unprotect and SREG ?

[hoaca388]

have try still not working... 😐 no display input
also i want know if using NeoProgrammer flash need to set Unprotect and SREG ?

I don't know. i not use CH341A.

[SMDFlea]

have try still not working... 😐 no display input
also i want know if using NeoProgrammer flash need to set Unprotect and SREG ?

No, don`t mess with any settings,leave it as is,it should program without any problems.

[foo007]

I don't know. i not use CH341A.

may i know what flash bios tool you using ? 🙏

[foo007]

No, don`t mess with any settings,leave it as is,it should program without any problems.

my CPU: Intel Pentium 6405u
Nuvoton NCT5567D-M

OMG.. because of last time my friend help me to flash bios have Accidentally press unprotect already... So what can i do now Need to edit SREG ?

[hoaca388]

may i know what flash bios tool you using ? 🙏

SFLY SP20P

https://www.sflytech.com/

[rogfanther]

If your friend´s machine is the same, try writing the backup of his bios to your , to see if it works.

[foo007]

If your friend´s machine is the same, try writing the backup of his bios to your , to see if it works.

have try it. Still not work.😐

Here is my friend bios backup. 👇