MBPr 2015 13" Early 2015 820-4924-A
Running slow, with SMC bypass works fine:
It has a NVME SSD Crucial P2 (1TB), tried another NVME adapter too.
- No water indicators tripped
- Sensors using iStat /HW show sensible values, only airport showing 129 degree (which is common) since we don't have ASD for this year board.
I have removed and dumped the EFI/BIOS:
- does cleaning the ME Region make sense?
Side notes
1) I do not have the original nor compatible SSD to test with
2) battery is showing service battery (it's down to 3700mah) - do not have a compatible one to try
3) Tried with the Camera cable disconnected
4) Wondering if booting from USB3 externally with internal SSD removed can help understand if it is a SSD issue.
5) using genuine 65W MagSafe2
6) Trackpad cable replaced since the last one was ghosting
Thank you
Running slow, with SMC bypass works fine:
It has a NVME SSD Crucial P2 (1TB), tried another NVME adapter too.
- No water indicators tripped
- Sensors using iStat /HW show sensible values, only airport showing 129 degree (which is common) since we don't have ASD for this year board.
I have removed and dumped the EFI/BIOS:
- does cleaning the ME Region make sense?
Side notes
1) I do not have the original nor compatible SSD to test with
2) battery is showing service battery (it's down to 3700mah) - do not have a compatible one to try
3) Tried with the Camera cable disconnected
4) Wondering if booting from USB3 externally with internal SSD removed can help understand if it is a SSD issue.
5) using genuine 65W MagSafe2
6) Trackpad cable replaced since the last one was ghosting
Thank you
Comment