Are USB C connectors standard

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Eniaro
    Senior Member
    • Mar 2021
    • 76
    • United States
    #1

    Are USB C connectors standard

    I have a number of laptops with damaged USB-C connectors.
    I wonder if I can buy a few replacement connectors from Mouser to keep, as it seems like the wafer in the middle breaks easily and oftentimes causes shorts.
    I do know there are multiple connectors out there, but I'm curious to know which are most commonly used and how can I identify and purchase the correct ones.
    I purchased USB mini-B connectors in the past, only to find out that the connector was flipped (Lenovo smh).
    Tags: None
    • diif
      Badcaps Legend
      • Feb 2014
      • 6978
      • England
      #2
      Re: Are USB C connectors standard

      You want to buy something like this
      https://www.aliexpress.com/item/1005001598422719.html

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Document Archive
          HP 14-am047tx + 1 YR Full Standard Extended Warranty + McAfee Scratch Card 1PC User (1 YR) Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the HP 14-am047tx + 1 YR Full Standard Extended Warranty + McAfee Scratch Card 1PC User (1 YR) Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 14-am047tx + 1 YR Full Standard Extended Warranty + McAfee Scratch Card 1PC User (1 YR) boardview and 14-am047tx + 1 YR Full Standard Extended Warranty + McAfee Scratch Card 1PC User (1 YR) schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon...
          09-06-2024, 08:30 AM
        • CapLeaker
          Crimping CAT7 connectors high failure rates
          by CapLeaker
          I’ve had and got a few projects using quality CAT6 and CAT7 23awg solid copper, shielded, direct burial cable. Each time I use CAT7 connectors, most of them fail making good connections to the 4 wire pairs after crimping. I tied a couple of crimping tools, thinking my crimper is bad. Also used different CAT7 RJ45 connector manufacturers. Same thing. I kinda calculate 6 connectors to make one cable!
          Get this: I use CAT5 or CAT6 connectors, no problem. Very rare I have a miss crimp with those. So what gives?! ...
          11-09-2024, 04:11 PM
        • japlytic
          Non-standard use of HDMI connectors
          by japlytic
          Two examples of such I have seen were on the logic analyser (SBUS) connector on a Siglent SDS1104X-E and the analog AV input on an AVerMedia H727.
          Do you know of any other examples?
          07-14-2021, 10:09 PM
        • ttmi100x
          HANNSG Hi221 -- 2 secs to black feat. CCFL flicker & "burn" marks on power board
          by ttmi100x
          Greetings everyone,


          I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...


          The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
          Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.

          Upon closer inspection...
          "Burnt" resistor
          6 Photos
          07-31-2024, 06:36 PM
        • corrize
          Desoldering - soldering BGA chip close plastic mini fpc connectors ?
          by corrize
          Hello, I need your advise please ? I need to remove and replace the BGA black chip with fpc connectors around. The PCB is small, from camera.

          There is no plastic component directly under, on the other face, (only fuse and oscillator I can remove if they are sensitives to heat), but there is a lot of very small smd components I don't want to desolder by mistake.

          I have :
          - hot air, and a           ll stuff around
          - true kapton tape
          - 140 and 180 degree soldering paste
          - bismuth
          - little hot plate 250 degree max
          - the new BGA chip with probably          ...
          05-20-2025, 01:26 AM
        • Loading...
        • No more items.
        Working...