Hi again!
-Laptop fell from the table.
-Motherboard -seems- intact.
-It turns on kinda normal but NO DISPLAY, NO BACKLIGHT.
I'm not too familiar with ASUS laptops yet. I'm using a similar laptop model Boardview. (UX333FN REV2.0)
I feel there might be something wrong with these coil impedance values yet the voltage values go normal.
COIL = VOLTAGES (adapter powered) = IMPEDANCE TO GND (off and unplugged)
+VCCSA = 1.0V = 22ohm
+VCCCORE1 = 0.8V = 3.5ohm
+VCCCORE2 = 0.8V = 3.5ohm
+1.05VSUS = 1.05V = 59.ohm
+1.2V = 1.2V = High-fast fluctuations (weird)?
+1.8VSUS = 1.8V = 27.3k ohm
+3VA_DSW = 3.3V = 31.5k ohm
+5V = 5.1V = 22k ohm
+5VSUS = 0V = 6ohm
P_CHG_RSENS_SHAPE = 0.28v = 500k ohm
+VCCGT = NC = NC
+1.3VSG = NC = NC
+1.2V seems to have a -stable-voltage-value meassuring with multimeter but in resistance mode it just goes crazy.
+5VSUS missing.
Boardview seems to be in some $ites. If anyone has it would appreciate if can share. Thanks in advance!
-Laptop fell from the table.
-Motherboard -seems- intact.
-It turns on kinda normal but NO DISPLAY, NO BACKLIGHT.
I'm not too familiar with ASUS laptops yet. I'm using a similar laptop model Boardview. (UX333FN REV2.0)
I feel there might be something wrong with these coil impedance values yet the voltage values go normal.
COIL = VOLTAGES (adapter powered) = IMPEDANCE TO GND (off and unplugged)
+VCCSA = 1.0V = 22ohm
+VCCCORE1 = 0.8V = 3.5ohm
+VCCCORE2 = 0.8V = 3.5ohm
+1.05VSUS = 1.05V = 59.ohm
+1.2V = 1.2V = High-fast fluctuations (weird)?
+1.8VSUS = 1.8V = 27.3k ohm
+3VA_DSW = 3.3V = 31.5k ohm
+5V = 5.1V = 22k ohm
+5VSUS = 0V = 6ohm
P_CHG_RSENS_SHAPE = 0.28v = 500k ohm
+VCCGT = NC = NC
+1.3VSG = NC = NC
+1.2V seems to have a -stable-voltage-value meassuring with multimeter but in resistance mode it just goes crazy.
+5VSUS missing.
Boardview seems to be in some $ites. If anyone has it would appreciate if can share. Thanks in advance!
Comment