LENOVO T490 High quality photo of CPU area needed

[Robin21]

Hello,

Does anyone have a motherboard from the Lenovo T490 model FT490/FT492/FT590/FT531 NM-B901 and could take a picture of the CPU area, including all the components around it? I would be very grateful.

During the CPU replacement process, I messed up all the resistors and capacitors, and now I can't get it to work again. The motherboard was powering up before, but now it doesn't, even with the newly installed CPU. All voltages are okay, and I don't have any shorts, so I'm assuming I'm missing one of the resistors.

I've also followed the schematic and Broadview, but there are small differences, unfortunately.


It's this MB:

[imranromi]

Hello,

Does anyone have a motherboard from the Lenovo T490 model FT490/FT492/FT590/FT531 NM-B901 and could take a picture of the CPU area, including all the components around it? I would be very grateful.

During the CPU replacement process, I messed up all the resistors and capacitors, and now I can't get it to work again. The motherboard was powering up before, but now it doesn't, even with the newly installed CPU. All voltages are okay, and I don't have any shorts, so I'm assuming I'm missing one of the resistors.

I've also followed the schematic and Broadview, but there are small differences, unfortunately.


It's this MB:

Here

[Robin21]

Thank You so much!🙏

[tomodachi]

Thank You so much!🙏

Please let us know if it worked after CPU replacement

[Robin21]

Hi,

There were some differences. I've set all the resistors as shown in the photo. After connecting the USB-C power, the power button LED blinks three times. All voltages on the board are okay.

The difference is that my motherboard has an i7 CPU and a graphics card.
So, I'll need to compare all components with the schematic again.