HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

[dj_ricoh]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

i got 2xi3 and i5 defective.
you understand why i ask and btw everyday i upgrade notebooks and its only 30% that it will fit.
so those cpu are 100% working? if not compatible? cuz if its not then...

[atsio]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

But when checking PU13 for HWPG without CPU voltage jumps up...

Yes...Exactly...

What about VR_ON?

HPWPG has also to do with PU3, PU11, PU4 and PU1.

[loser18]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

i got 2xi3 and i5 defective.
you understand why i ask and btw everyday i upgrade notebooks and its only 30% that it will fit.
so those cpu are 100% working? if not compatible? cuz if its not then...

100% compatible...
One is i3-2330M & the other i3-2350M...
I've got a strong feeling that one of them may be faulty, but both???

[loser18]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

i got 2xi3 and i5 defective.
you understand why i ask and btw everyday i upgrade notebooks and its only 30% that it will fit.
so those cpu are 100% working? if not compatible? cuz if its not then...

What about VR_ON?

HPWPG has also to do with PU3, PU11, PU4 and PU1.

I know...for example PU11 has 2 signals one is 1.05V_VTT_PWRGD which should enable PU1...So complex...

I don't understand that HWPG signal...
What's the flow?Does it go from regulator to regulator and last one sends to SIO or all of them???

[atsio]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

All of them. All receive mainon. See timming from similar boards

[loser18]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

OK...UPDATE...

Now also getting +1.5VSUS but PL16 & PQ9 is getting hot...
Will replace & post results...

[dj_ricoh]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

awesome!
after this post i will stop destroying g6 motherboards :|

[loser18]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

awesome!
after this post i will stop destroying g6 motherboards :|

This mobo is like fuckin puzzle game,lol...

[loser18]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

PU9 replaced...I've checked literally everything around it, but still getting hot...
When checked Q36 noticed that on PIN4 (gate) is around 10V...(it's a AON4470)
Is it normal???

It's also getting hot...Replaced PU2 but still the same...

[loser18]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

replaced million components...

PU9 still getting hot...
Got no output from PU11 which is +1.05V PCH power rail,all other voltages are OK...(with CPU)
Replaced PU11 & all fets related...
Without CPU I've got all voltages (@ coils) before DRON (I mean they jump up for a sec)...
Even reflowed U24, but still the same...

THIS FUCKIN MOBO DRIVES ME NUTS & WILL BRAKE IT IN A HALF I THINK...

[loser18]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

Pls, if anybody has this mobo working...Could you post correct resistance @ PL25?

[nasser_pczone]

Re: HP G6 Series - Quanta R13 - NO DISPLAY, NO RUN VOLTAGES, VRON Missing...

Pls, if anybody has this mobo working...Could you post correct resistance @ PL25?

Just fucking that shit board