iPad Pro 11-inch (4th Generation) A2759 - Missing component

[tccyo22]

Manged to get a hold of an iPad Pro 11" 4th Gen however it does not charge and upon opening it looks like someone has tried to replace the port and knocked a component off but I cannot find a schematic or boardview for this model so was wondering if anyone could help identify what I think is a missing pad and capacitor? Looks like whoever was in here last tried to put it back on with hot air and melted the plastics too...

[mon2]

Appears to be a capacitor from the bv file in my database but not sure of its value.

[tccyo22]

Appears to be a capacitor from the bv file in my database but not sure of its value.

Thanks, figured it might be. Just gotta find the value now, unfortunately don't have another one of these to check or pinch one from.

[mon2]

Review other iPad schematics and boardview files to compare.

[mon2]

Found it. Same parts; same reference; same location on another ipad with schematics.

PS: Unless there is trace break, this part will not be missed if not replaced.

[tccyo22]

Found it. Same parts; same reference; same location on another ipad with schematics.

PS: Unless there is trace break, this part will not be missed if not replaced.

Thank you so much for sharing this. The yellow pad is missing as well so I'm going to assume where that trace to the left isn't connected to somewhere that the line draws to the right towards what is most probably U22A1 (also very likely under the shield unless i can connect a wire somewhere else). I've got the iPad switched on and it seems to be mostly working aside from the lack of charging which is expected if a trace is missing