hp g6 shutdown when connected to charger.

[highpulse]

if it runs on battery work normal , once i insert dc charge it will shutdown ,

it have a bq738 , replaced with a 728 but the same issue happen , so i think not a charging ic problem.

only with dcjack , without battery does the same issue ,start to enter in windows then shutdown.

resuming it will only shutoff with dcjack on .

anyone had this kind of issues ?

[dj_ricoh]

Re: hp g6 shutdown when connected to charger.

what board you got?
schematic? nothing?

come on highpulse!

[MDY]

Re: hp g6 shutdown when connected to charger.

shutdown immediately or after some time?

[Francisco.s]

Re: hp g6 shutdown when connected to charger.

if it runs on battery work normal , once i insert dc charge it will shutdown ,

it have a bq738 , replaced with a 728 but the same issue happen , so i think not a charging ic problem.

only with dcjack , without battery does the same issue ,start to enter in windows then shutdown.

resuming it will only shutoff with dcjack on .

anyone had this kind of issues ?

It seems that motherboard is a QUANTA R33, and BQ738 is PU9. (BQ24738)

Check value of esr of +VCC_CORE, there is many tantalum capacitors in this line.

Note that there isn't any NEC-TOKIN capacitor.

[dj_ricoh]

Re: hp g6 shutdown when connected to charger.

A few days ago i found 2 diodes connected to ground go bad and a fet that was used to discharge.
Do a fast check and see if you got any short near dc jack.

[highpulse]

Re: hp g6 shutdown when connected to charger.

KBC bios upgraded and fully working now , thk guys

[dj_ricoh]

Re: hp g6 shutdown when connected to charger.

Can you put the file?
What model of g6 you got?

[highpulse]

Re: hp g6 shutdown when connected to charger.

pff not even remeber but the board was a

da0r33mb6e0

the bios file is on the attachment

[gitsfarmaz]

Re: hp g6 shutdown when connected to charger.

yes i have the same probleM with my DA0R33MB6E0 REV e INTEL CORE I3 WITH NO DEDICATED GRAPHICS CARD...HOW DID YOU GUYS SOLVE THIS PROBLEM

[Cyrielle]

Re: hp g6 shutdown when connected to charger.

Hi all,
Newbie question: what is KBC bios and how do you flash it?
Thank you

[ktmmotocross]

Re: hp g6 shutdown when connected to charger.

...

[Techtiger]

Re: hp g6 shutdown when connected to charger.

Hi all,
Newbie question: what is KBC bios and how do you flash it?
Thank you

BIOS (basic input/output system) chip on a computer's Mob that recognizes and controls various devices on the Mob ,EC/KBC stands for "Embedded Controller/Keyboard Controller & to flash BIOS you need bios chip programmer tool kit (Ebay)