hp 2000 shut off within 30 min.

[mitu_sharma]

hello friends pls give me solution for this kind of problem.

m/b part no. 010170100-491-g
newton cr&hr_hpc
mv_mb_v1

[passete]

Re: hp 2000 shut off within 30 min.

did you check the temps ?

[Djosla]

Re: hp 2000 shut off within 30 min.

if temps are ok...than you need to clean me region of your bios...

[mitu_sharma]

Re: hp 2000 shut off within 30 min.

i chk the temp it is normal
how do i cleran me region of bios
pls help

[ala_borbe]

Re: hp 2000 shut off within 30 min.

here is dump from different model but same motherboard

sp66781 is update from web and has clean me and no dmi data in it
1858 is the one you need

[mitu_sharma]

Re: hp 2000 shut off within 30 min.

thanks borbe

but tell me one thing i can do (clean me region) myself

how is it possible

[ala_borbe]

Re: hp 2000 shut off within 30 min.

search on youtube

[alihomee]

Re: hp 2000 shut off within 30 min.

hahahaahhahaah ala-borbe is not in the mood to teach...........sharma did u solve the problem with that files given by ala_borbe

[mitu_sharma]

Re: hp 2000 shut off within 30 min.

not yet

[mitu_sharma]

Re: hp 2000 shut off within 30 min.

write all bios given by borbe but no luck
what i do pls help

[the-sky-blue]

Re: hp 2000 shut off within 30 min.

just clean cpu fan and change thermal pads ...
last think maybe you need to update bios .

[Joseph cauchi]

Re: hp 2000 shut off within 30 min.

Please explain how to update the bios? Do not think everybody is like you .with a short answer you do not solve any problems.

[highpulse]

Re: hp 2000 shut off within 30 min.

this issue is happening due to bad HUB , in this case cpu is not supported by PCH , first , chek CPU model code , and therefore , chek whitch PCH you have on board , then chek if the cpu you are using is compatible on the pch table . my bet is that it wont be .
the exact 30 minutes shutdown is a simple protection of the HUB since is detecting anormalities on cpu line .
IF cpu is correct with PCH , then your bios is not ok , you must rewrite for the correct pch / ME region

cheers

Alihome , its not that ala borbe dont want to teach , but its something that requires a lot of step to be teached on forum , but as it mentioned youtube explain very well , including link of how to do it , and were to get the regions files , etc

Also to avoid this kind of comments , they are certain things , that not even need of an answer since does answer are usually on first google page :P
now more technician electronics issues ,are more hard to find , so thats its ok of asking all this infos here

[highpulse]

Re: hp 2000 shut off within 30 min.

joseph , its easy to flash , first do you have a rom flasher ? for ex TL866CS minipro .
if you got one of does units , follow this steps

1- chek board code , with this board code it will be easyer to find a decent dump
2- desolder the bios chip on the board , read on the programmer , and save the reading you've done .
3- import to mini pro programmer , the dump you donwloaded , and press Programming.

4- resolder back the rom chip and try it out

[mitu_sharma]

Re: hp 2000 shut off within 30 min.

thanks highpluse

in short i do everything but no result, it has hm70 finally i am searching flash image tool for hm70 i did not get.

sorry one more thing i have change core i3 CPU instead of dualcore. so what will i do

[highpulse]

Re: hp 2000 shut off within 30 min.

so you got hm70
hold on
so for HM/= cpu support are the following ones

Intel Mobile Celeron Dual-Core
1000M - AW8063801120200
1000M, 1.8 GHz, L3 2 MB
1007U - AV8063801118700
1007U, 1.5 GHz, L3 2 MB
1020M - AW8063801443700
1020M, 2.1 GHz, L3 2 MB
1037U - AV8063801442900
1037U, 1.8 GHz, L3 2 MB
Intel Pentium Dual-Core Mobile
2020M - AW8063801033501 / AW8063801211202 / AW8063801539300
2020M, 2.4 GHz, L3 2 MB
2030M - AW8063801120500 / AW8063801208800
2030M, 2.5 GHz, L3 2 MB
2117U - AV8063801058800
2117U, 1.8 GHz, L3 2 MB
2127U - AV8063801119100
2127U, 1.9 GHz, L3 2 MB
2129Y - AV8063801377901
2129Y, 1.1 GHz, L3 2 MB
Data source:

chek if you is one of does , if you got hm70 it will work with simple dual core cpu , it might not work with your i3 , unless you change the hub and bios

[mitu_sharma]

Re: hp 2000 shut off within 30 min.

u mean to say that i3 cpu is not supported on hm70,

according to u (highpluse), i replace the cpu with penitum dualcore but still same

this kind of problem has been me region, can u provide me flash image tool for hm70. genius i am waiting for ur reply thanx.

[mitu_sharma]

Re: hp 2000 shut off within 30 min.

pls do something i am in trouble.

[ala_borbe]

Re: hp 2000 shut off within 30 min.

post 5 file SP66781.zip has bios with clean me for that motherboard

[highpulse]

Re: hp 2000 shut off within 30 min.

mitu sharma , the cpu that you inserted on the machine hass a code , like "SLxxx" , put this code on google and chek wich is the dual core you inserted and chek with the list i gave you above not all dual cores are accepted mate ) if yours is one of the names on the list , then flash bios with the bios file found on post number 5 of this thread as ala_borbe mentioned.