Announcement

Collapse
No announcement yet.

LENOVO YOGA C740-15IML (COMPAL FYG50 NM-C433 REV 1.0) Looking for PD controller firmw

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    LENOVO YOGA C740-15IML (COMPAL FYG50 NM-C433 REV 1.0) Looking for PD controller firmw

    I am looking for firmware for the TPS65988 PD controller, I need a dump from U4503 W25Q80DVZPIG.

    #2
    Re: LENOVO YOGA C740-15IML (COMPAL FYG50 NM-C433 REV 1.0) Looking for PD controller f

    I need it too

    Comment


      #3
      Re: LENOVO YOGA C740-15IML (COMPAL FYG50 NM-C433 REV 1.0) Looking for PD controller f

      Originally posted by ipodnano16g View Post
      I need it too
      What size is the chip that its flashed to 1MB,2MB ?

      .
      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

      Comment


        #4
        Re: LENOVO YOGA C740-15IML (COMPAL FYG50 NM-C433 REV 1.0) Looking for PD controller f

        Originally posted by SMDFlea View Post
        What size is the chip that its flashed to 1MB,2MB ?

        .
        TPS65988 DH

        https://*********/file/d/1-Xhh8fy2OM...ew?usp=sharing
        Last edited by Vesko356; 10-02-2023, 08:19 AM. Reason: External url removed.

        Comment


          #5
          Re: LENOVO YOGA C740-15IML (COMPAL FYG50 NM-C433 REV 1.0) Looking for PD controller f

          Originally posted by DmitriiR View Post
          I am looking for firmware for the TPS65988 PD controller, I need a dump from U4503 W25Q80DVZPIG.
          This is the file I downloaded from someone on vinafix. It's not certain because I loaded it and it still doesn't have VBUS_CTRL. The old IC burned out and I replaced it with a new IC purchased from AliExpress
          Attached Files

          Comment


            #6
            Re: LENOVO YOGA C740-15IML (COMPAL FYG50 NM-C433 REV 1.0) Looking for PD controller f

            both files are ok, the tps 65988 I bought on AliExpress doesn't work
            Last edited by ipodnano16g; 10-02-2023, 08:56 PM.

            Comment

            Working...
            X