toshiba satellite pro c50-g-105

[vrem]

hi all,
i need help, have a dynabook sat pro c50 i guess corrupted bios, laptop power on , fan spin ,ok blue led, just no screen, stay black also external monitor by hdmi
i try bios found here model satellite pro l50 but not work, mine is cpu i3 10 gen
SATELLITE PRO C50-G-105
PN/ PYS24E-00200FIT
board IP3-NC16S-MB V20 20201229B
attack here backup winbond 16 Mb

[hardware1]

Re: toshiba satellite pro c50-g-105

hi all,
i need help, have a dynabook sat pro c50 i guess corrupted bios, laptop power on , fan spin ,ok blue led, just no screen, stay black also external monitor by hdmi
i try bios found here model satellite pro l50 but not work, mine is cpu i3 10 gen
SATELLITE PRO C50-G-105
PN/ PYS24E-00200FIT
board IP3-NC16S-MB V20 20201229B
attack here backup winbond 16 Mb

Virgin BIOS with your DMI, hope it works fine.

Serial Number: 31165697H.

[vrem]

Re: toshiba satellite pro c50-g-105

first of all i want thanksgiving you for help, i wrote ur file and , to begin laptop started , blue power led, screen black, also hdmi display stay black, then began to no more power on just blink blue led , aniway serial no you wrote is ok, the same in the bottom label, i dont know, maybe hardware issue?
thanks again

[hardware1]

Re: toshiba satellite pro c50-g-105

first of all i want thanksgiving you for help, i wrote ur file and , to begin laptop started , blue power led, screen black, also hdmi display stay black, then began to no more power on just blink blue led , aniway serial no you wrote is ok, the same in the bottom label, i dont know, maybe hardware issue?
thanks again

This is your dump file with ME Region Cleaned, give it a try.
If the problem still present, it might be a Hardware issue.

[vrem]

Re: toshiba satellite pro c50-g-105

hi again,
tried also change winbond chip with another new, sometime power on ,30 seconds about fan spin, then off, your bios is ok, DMI show my serial number,
tried both firmware,with clear ec & my dmi, i guess hardware fail, sometime no 1,2 v cpu rail and realteck chip become very hot.

thanks again for ur help, I offered you a coffee

[Vesko356]

Re: toshiba satellite pro c50-g-105

thanks again for ur help, I offered you a coffee

"Coffee offers" or payment of any kind are not allowed, and are explicitly forbidden by the rules!
You can make a donation in support of the forum.

.

[vrem]

Re: toshiba satellite pro c50-g-105

i made a donation for web site trough paypal link inside ur post, you can check, i just want say thanks to hardware1 user for help

[Vesko356]

Re: toshiba satellite pro c50-g-105

i made a donation for web site trough paypal link inside ur post, you can check, i just want say thanks to hardware1 user for help

Than you for your support, much appreciated!
We both express our gratitude to Hardware1 for his hard work and help towards you and the other members!

.

[hardware1]

Re: toshiba satellite pro c50-g-105

i made a donation for web site trough paypal link inside ur post, you can check, i just want say thanks to hardware1 user for help

You're welcome.

As the Moderator said, we don't take money for helping people in this forum. We hope that the other members be generous like you and donate to the forum to keep the BIOS Section alive.

[Oasis39]

Re: toshiba satellite pro c50-g-105

hi again,
tried also change winbond chip with another new, sometime power on ,30 seconds about fan spin, then off, your bios is ok, DMI show my serial number,
tried both firmware,with clear ec & my dmi, i guess hardware fail, sometime no 1,2 v cpu rail and realteck chip become very hot.

thanks again for ur help, I offered you a coffee

Try this