Please unlock bios HP Zbook Firefly 14 G9

[badr4k]

Please unlock bios zbook 14 g9

[Vesko356]

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[redoxy]

Please help me remove BIOS password.

Laptop Model: HP zBook Firefly 14 G9
Serial #: 5CG24932R4
Motherboard: FF14-MV-GBM 6050A3310001-MB-A01

[qayyum786]

Please help me remove BIOS password.

Laptop Model: HP zBook Firefly 14 G9
Serial #: 5CG24932R4
Motherboard: FF14-MV-GBM 6050A3310001-MB-A01

At 1st boot press F10 and RESET BIOS to factory defaults, save, restart and password will go on. After that enter in to bios setup and in Main tab you have "set machine unique data" and write there what it's written on the label inside the cover.
Or use hp bcu tool

[redoxy]

At 1st boot press F10 and RESET BIOS to factory defaults, save, restart and password will go on. After that enter in to bios setup and in Main tab you have "set machine unique data" and write there what it's written on the label inside the cover.
Or use hp bcu tool

Thanks Gayyum786 for the quick response and the file. I followed the instructions but there was no option to reset BIOS. The first screen I saw was information stating "there was mismatch in the BIOS and it has been recovered" and the only option was to press OK.
After that the BIOS lock is still on.

Not sure if I did anything wrong.

Thanks again for the help.

[qayyum786]

Thanks Gayyum786 for the quick response and the file. I followed the instructions but there was no option to reset BIOS. The first screen I saw was information stating "there was mismatch in the BIOS and it has been recovered" and the only option was to press OK.
After that the BIOS lock is still on.

Not sure if I did anything wrong.

Thanks again for the help.

Try again and make sure you follow the steps

[redoxy]

Try again and make sure you follow the steps

Thanks!
It worked. The BIOS password is removed but I have the MPM countdown. I have updated the device information through "Set Machine Unique Data" in the BIOS but still have the MPM enabled.
I'll wait to see if it goes away after the countdown reaches 1.

I will update the thread once the countdown reaches 1 or whenever, the MPM goes away.
I appreciate the help.

Cheers!

[qayyum786]

Thanks!
It worked. The BIOS password is removed but I have the MPM countdown. I have updated the device information through "Set Machine Unique Data" in the BIOS but still have the MPM enabled.
I'll wait to see if it goes away after the countdown reaches 1.

I will update the thread once the countdown reaches 1 or whenever, the MPM goes away.
I appreciate the help.

Cheers!

use this HP BCU TOOL ( BIOS Configuration Utility) to fill the DMI info

[redoxy]

use this HP BCU TOOL ( BIOS Configuration Utility) to fill the DMI info

A million thanks Guyyum786.That worked.
For newbies like me, I found this how to video that was very helpful in using the HP BCU tool hp DMI tool || easy way to update serial no || manufacturing mode off (youtube.com)
It does a walkthrough, original language is not English but provides texts in the video of the important steps so I was able to follow without understanding the language.

Also, I run into an issue on boot with a MPM error "Cirrus Discrete Amp Calibration Data" Missing or invalid. I found the solution in another thread for HP EliteBook 840 G9 below:

https://www.badcaps.net/forum/troubl...0-g9-error-mpm

I just copied the code provided in post # 5 of that thread and it worked for the ZBook Firefly 14 inch G9.

There is additional information on the same topic in the the thread below with another way of solving the Cirrus Discrete Amp Error

https://www.badcaps.net/forum/troubl...k-830-g9/page2


Thanks, again for all the help.

Cheers!

[qayyum786]

A million thanks Guyyum786.That worked.
For newbies like me, I found this how to video that was very helpful in using the HP BCU tool hp DMI tool || easy way to update serial no || manufacturing mode off (youtube.com)
It does a walkthrough, original language is not English but provides texts in the video of the important steps so I was able to follow without understanding the language.

Also, I run into an issue on boot with a MPM error "Cirrus Discrete Amp Calibration Data" Missing or invalid. I found the solution in another thread for HP EliteBook 840 G9 below:

https://www.badcaps.net/forum/troubl...0-g9-error-mpm

I just copied the code provided in post # 5 of that thread and it worked for the ZBook Firefly 14 inch G9.

There is additional information on the same topic in the the thread below with another way of solving the Cirrus Discrete Amp Error

https://www.badcaps.net/forum/troubl...k-830-g9/page2


Thanks, again for all the help.

Cheers!

I'm glad to hear that

[kaltmond]

Try again and make sure you follow the steps

Hi qayyum786, can you help me to temporary unlock the MPM countdown of my Zbook Studio G9, i want to update my ME but only with unlocked MPM possible. My main BIOS dump from U367 is attached.
Thanks for the kind help.

Serial Number: 0001760LS4
UUID: 848A822CFA5C9F44ACF229FBF61C42D6

[qayyum786]

Hi qayyum786, can you help me to temporary unlock the MPM countdown of my Zbook Studio G9, i want to update my ME but only with unlocked MPM possible. My main BIOS dump from U367 is attached.
Thanks for the kind help.

Serial Number: 0001760LS4
UUID: 848A822CFA5C9F44ACF229FBF61C42D6

Provide Some Hisstory Regard How You Got The MPM Error It Was Locked With Password Or Something Els

If It Was A Password Issue In Past Then Press F10 And RESET BIOS to Factory Defaults,Go To Security Tab Reset Security Setting Save And Flash Your Old Locked Bios Again

Or Simply Use HP BCU TOOL to Fill DMI

[kaltmond]

Provide Some Hisstory Regard How You Got The MPM Error It Was Locked With Password Or Something Els

If It Was A Password Issue In Past Then Press F10 And RESET BIOS to Factory Defaults,Go To Security Tab Reset Security Setting Save And Flash Your Old Locked Bios Again

Or Simply Use HP BCU TOOL to Fill DMI

Hi qayyum786, thanks for the reply.

It is a sample unit without MPM error or password issue, only the stock BIOS/ME is outdated. I cannot update official BIOS but i can update the ME Region, to do that i need first a unlocked MPM. The BCU tool is not functional with error 6 access denied.

I saw you helped redoxy removed his bios pwd, and he got a MPM countdown. So i think maybe you can help me modify the dump to unlock the countdown. In winnex i cannot find the UUID in the bios dump, only SN/Feature Byte/Build ID etc are available.....

[qayyum786]

Hi qayyum786, thanks for the reply.

It is a sample unit without MPM error or password issue, only the stock BIOS/ME is outdated. I cannot update official BIOS but i can update the ME Region, to do that i need first a unlocked MPM. The BCU tool is not functional with error 6 access denied.

I saw you helped redoxy removed his bios pwd, and he got a MPM countdown. So i think maybe you can help me modify the dump to unlock the countdown. In winnex i cannot find the UUID in the bios dump, only SN/Feature Byte/Build ID etc are available.....

if you have old bios backup then replace Block 19F1000 TO 1A70FFF from old one to new one

[VektorR]

Hello. Please help me to remove BIOS password from my HP Zbook Firefly 14 G9.
Serial: 5CG3107JP8, Prod.ID: 6W4R9PA#ABG
Motherboard version: 6050A3417601-MB-A01.
I really hope that you can do it because other techs guys failed.
Thanks in advance!

[rex98]

Hello. Please help me to remove BIOS password from my HP Zbook Firefly 14 G9.
Serial: 5CG3107JP8, Prod.ID: 6W4R9PA#ABG
Motherboard version: 6050A3417601-MB-A01.
I really hope that you can do it because other techs guys failed.
Thanks in advance!

first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
use BCU. you can permanently disable Absolute lock in BCU.
here's your dmi:

Serial Number: 5CG3107JP8
Product #/SKU: 6W4R9PA#ABG
CT Number: PRBPL00WBHT229
Description: HP ZBook Firefly 14 inch G9
BuildID: 22WWWPBT601#SABG#DABG
Feature Byte: 476J6S6b7B7M7Q7U7W7m7saBaEapaqauawbUbhcAdpdqfAfPgSguhKjhk8mEn7nVngpTpqqj.a5
MAC Address : 7C:4D:8F:FB:B9:A3

[VektorR]

first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
use BCU. you can permanently disable Absolute lock in BCU.
here's your dmi:

Serial Number: 5CG3107JP8
Product #/SKU: 6W4R9PA#ABG
CT Number: PRBPL00WBHT229
Description: HP ZBook Firefly 14 inch G9
BuildID: 22WWWPBT601#SABG#DABG
Feature Byte: 476J6S6b7B7M7Q7U7W7m7saBaEapaqauawbUbhcAdpdqfAfPgSguhKjhk8mEn7nVngpTpqqj.a5
MAC Address : 7C:4D:8F:FB:B9:A3

Thanks for a super quick reply. Is there any way to flash this patched BIOS without unsoldering that BIOS chip again and programmator?

[VektorR]

first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
use BCU. you can permanently disable Absolute lock in BCU.
here's your dmi:

Serial Number: 5CG3107JP8
Product #/SKU: 6W4R9PA#ABG
CT Number: PRBPL00WBHT229
Description: HP ZBook Firefly 14 inch G9
BuildID: 22WWWPBT601#SABG#DABG
Feature Byte: 476J6S6b7B7M7Q7U7W7m7saBaEapaqauawbUbhcAdpdqfAfPgSguhKjhk8mEn7nVngpTpqqj.a5
MAC Address : 7C:4D:8F:FB:B9:A3

Hi again. I flashed provided patched BIOS followed by firsr boot, second boot instructions. Unfortunately Security Settings can't be restored to defaults - current Admin password request is popping up. So my laptop boots up with red warning message 'System boots up in Manufacturing Programm Mode..... . Can't get rid of it. BCU tool doesn't allow change any vallues due to Admin password. It's still there. Provided patched BIOS allows to bypass BIOS password an access BIOS but it's not removing it . Could you help with it please?

[mohammad faisal]

need unlock firefly 14 g10 plz make patch

[SMDFlea]

need unlock firefly 14 g10 plz make patch

Off topic, this thread is for the G9 model. Post your request in firefly 14 G10 thread,and include the required laptop serial number --> https://www.badcaps.net/forum/troubl...before-posting

[rex98]

Hi again. I flashed provided patched BIOS followed by firsr boot, second boot instructions. Unfortunately Security Settings can't be restored to defaults - current Admin password request is popping up. So my laptop boots up with red warning message 'System boots up in Manufacturing Programm Mode..... . Can't get rid of it. BCU tool doesn't allow change any vallues due to Admin password. It's still there. Provided patched BIOS allows to bypass BIOS password an access BIOS but it's not removing it . Could you help with it please?

Here try this same procedure