DELL ALIENWARE M16 R1 Bios Dump needed

[hirens]

Hello guys i have a dell Alien ware m16 R1 that has boot loop.
It displays alien ware log then goes off and the sequence repeats its self.
board number: 213260-1 INFINITY RPL-HX+NV-P
S/N/ Service Tag: 3RZ0FS3
Reg model: P124F
Old file is attached
i need your help guys
thanks

[volinakis]

try. let it run for 2 mins, it will restart several time with no image.

[hirens]

try. let it run for 2 mins, it will restart several time with no image.

with this dump the machine acts as if completely dead. nothing happens no fan spin no nothing

[volinakis]

with this dump the machine acts as if completely dead. nothing happens no fan spin no nothing

check soldering, bios is a virgin one from update and with clean ME.

[hirens]

check soldering, bios is a virgin one from update and with clean ME.

man i have tried this file so many times and it doesn't work trust me.
when i solder its original back up again it works just the same way it was. so the problem ain't soldering bro.
kindly help me with another file
patiently waiting

[volinakis]

man i have tried this file so many times and it doesn't work trust me.
when i solder its original back up again it works just the same way it was. so the problem ain't soldering bro.
kindly help me with another file
patiently waiting

ok, try this only clean ME version, in previous one I was updating bios region to 1.12, also ME to 16.1.27.2225.

[hirens]

ok, try this only clean ME version, in previous one I was updating bios region to 1.12, also ME to 16.1.27.2225.

Now this boots well but still looks like the bios has a problem
it doesn't load completely like its kinda half
it repeats the restart sequence all over again.
meaning the Me region is okay but the bios region has an issue
kindly help bro

[volinakis]

try an older bios version. In your dump it says is ver.1.02 but it doesn't exist in bios updates.

[hirens]

try an older bios version. In your dump it says is ver.1.02 but it doesn't exist in bios updates.

with this dump, its dead again😪

[volinakis]

there are 4 bios images in extracted update bios, try them all. I assumed that your bios is InfinityRplHx_MB2_18_MP because of data I found in your dump, but maybe it was a failed bios update from windows updates and is wrong.

[hirens]

there are 4 bios images in extracted update bios, try them all. I assumed that your bios is InfinityRplHx_MB2_18_MP because of data I found in your dump, but maybe it was a failed bios update from windows updates and is wrong.

hello, i don't see any attachment here except for the photo
sorry seen them
let me try and give feed back

[hirens]

there are 4 bios images in extracted update bios, try them all. I assumed that your bios is InfinityRplHx_MB2_18_MP because of data I found in your dump, but maybe it was a failed bios update from windows updates and is wrong.

i have tried and tested all these three and non-is giving me results. they all behave like the board is dead
need more help please

[skbasirsona]

lets try and post result ,,, make sure for original bios chip not change

[hirens]

lets try and post result ,,, make sure for original bios chip not change

Yes yes
finally this worked like charm
just entered the service tag and everything came to normal
thanks you so much bro
thanks 😁😁😂😂😂😂🤣🤣🤣

[skbasirsona]

Yes yes
finally this worked like charm
just entered the service tag and everything came to normal
thanks you so much bro
thanks 😁😁😂😂😂😂🤣🤣🤣

Great......

[jocareto]

Yes yes
finally this worked like charm
just entered the service tag and everything came to normal
thanks you so much bro
thanks 😁😁😂😂😂😂🤣🤣🤣

Who bios archive worked?

[ramkaskad12]

hello, help me find the bios for DELL Dell Alienware m16 R1 MB ( 213260-1 INFINITY RPL-HX+NV-P )
ST H747LS3
those on the forum do not work

[SMDFlea]

Thread merged.Please make use of the forum search before posting to find related threads where you can post your request.You do not need to start a new thread every time.

[Markus1741]

Hello try ...

[ramkaskad12]

thanks, bios works

[Markus1741]

Hello, I'm glad to hear that it helps, although I didn't think so...