HP ZBook 17 G6 DAXW3EMBAF0 REV F
Announcement
Collapse
No announcement yet.
HP ZBook 17 G6 Endpoint Security Controller Problem
Collapse
X
-
Originally posted by ameerrrr View PostHP ZBook 17 G6 DAXW3EMBAF0 REV F
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
-
Originally posted by ameerrrr View Post
s/n# 2TK03406L9
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment
-
Originally posted by ameerrrr View PostHP ZBook 17 G6 DAXW3EMBAF0 REV F
I will wait for your answer
Attached Files
Comment
-
All these informations need to be injected into the BIOS file. You may have to look around for them, usually they are all printed on stickers on the laptop back cover or on the inside of the device.
When you found all the numbers write them down and you can easily add them in Windows with a small program called "HP BIOS Configutration Utility (BCU)" which also lets you exit manufacture programming mode.
Search on Youtube for a video called " Solve Manufacture Programming Mode Is In Unlock Mode Error" on the channel "Dr-BIOS". Everything is explained there.
Comment
-
Originally posted by FZG View PostAll these informations need to be injected into the BIOS file. You may have to look around for them, usually they are all printed on stickers on the laptop back cover or on the inside of the device.
When you found all the numbers write them down and you can easily add them in Windows with a small program called "HP BIOS Configutration Utility (BCU)" which also lets you exit manufacture programming mode.
Search on Youtube for a video called " Solve Manufacture Programming Mode Is In Unlock Mode Error" on the channel "Dr-BIOS". Everything is explained there.
Comment
-
Originally posted by FZG View PostSure you followed all the steps in the video? Worked for me several times. Besides that, you can check the original BIOS dump (which you hopefully have). All DMI infos (serial number, feature byte etc.) should be in there somewhere. Copy them into a clean BIOS file and flash it.
Comment
-
Originally posted by Arsalan455 View PostHP zbook 17 g6
display ok hp logo hang PLZ REPAIR
S/N 5CD034CXF7
daxw3embaf0 REV FAttached Files
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment
Comment