@joha7698
Power on laptop, press F1 to go into Setup/BIOS, at password prompt type 1234 as password, then ENTER. Then follow the screen instructions.
Or your laptop may NOT have Supervisor Password active (only Power-On Password).
@joha7698
Power on laptop, press F1 to go into Setup/BIOS, at password prompt type 1234 as password, then ENTER. Then follow the screen instructions.
Or your laptop may NOT have Supervisor Password active (only Power-On Password).
Hi guys, is it possible to use a bios dump found online to flash onto a t450 ? When i press the power all led flashes and fan spins for a second then stops, nothing showing on the screen so i think it might be the bios. Will a same laptop bios work on this laptop ?
In Lenovo W540 i have 2 BIOS chip. One 4mb and other 8mb. I patched only 4mb. It is ok?
Computer was patched and later i updated BIOS to nevest 2.41 version without problem.
Now i found my PC have problem with going out of sleep mode (it stuck with black screen). I could not change and save woth sucess antything - after re-enter to BIOS all is as before i make any change.
My PC is randomly rebooting.
Someone have some hint or could help what i shall do? Maybe some KBC problem now after patch?
Comment