HP DMI Tool NBDmiFit

[ramuch7]

Re: HP DMI Tool NBDmiFit

Did you make a backup of the corrupt bios before flashing, if you did then start a new thread here https://www.badcaps.net/forum/forumdisplay.php?f=40 ,and post your corrupt bios and the laptop serial number

Thanks for the reply
I made a backup before flashing. It's a *.bin file.

So I open a new post

[SMDFlea]

Re: HP DMI Tool NBDmiFit

Thanks for the reply
I made a backup before flashing. It’s a *.bin file.

So I open a new post

yes, start a new thread and post your corrupt bios and the laptop serial number
.

[lapfix]

Re: HP DMI Tool NBDmiFit

Hi
I have the same issue and when I try to use DMI NBDmfit tolls I get the error vendor code not supported. And get an error manufacturing programme mode set
and ask for S/n SKU, CT Number
i have enclosed bios is it possible to clear the ME section Please
Thank you

https://www.badcaps.net/forum/showpo...&postcount=222

[sempre]

Re: HP DMI Tool NBDmiFit

Hi, I replaced the motherboard of a hp 820 g2 with one purchased on ebay,
I would like to know if I can change the serial number, so as to insert the one on the motherboard that was there before. I no longer have the old motherboard and I don't have the copy of the previous bios.
Thank you,

[crash_10uk]

Re: HP DMI Tool NBDmiFit

Hi all hope you can help.
A customer asked me to take a look at her Notebook. Upon booting the notebook and message appears.

Product Information to valid

The Following product information programmed into the system board is missing or invalid

System Board (00A) - System Board CT Number

The Notebook is a HP Notebook - 15-Ac107na
Does anyone have the proper DMI tools for this, i have tried a few and all i get is "accessed denied" when trying to set new config

I would be greatful for any help
Thanks

[ZBooker]

Re: HP DMI Tool NBDmiFit

I have a question regarding HP Elitebook/ZBook G3 mainboard replacement and DMI data:

If I had dumped my bios from the bad motherboard with a SPI programmer, could I simply flash it to the new board? Would this make DMI editing unnecessary and I would be able to keep my integrated Windows license? What would happen to the MAC-ID?

[Kiekko]

Re: HP DMI Tool NBDmiFit

SOO.. in case anyone else is wondering, I actually managed to unlock the MPM by running UEFIMPMUNLOCK.EFI in nbdmifit 2.13 from the EFI shell. Even though the program says it's not supported on my system (2.14 would be the right version, but has no UEFI) . After MPM unlock I can use the normal tools nbdmifit or wndmifit to write the details

Thank you very much! This solved my problem! You are the best!

[musangpusa]

Re: HP DMI Tool NBDmiFit

Help.I have EliteBook 2570p.
On HP product serial finder, this notebook's warranty started 2013, ended 2014.
On power on, I can read *Manufacture Program Mode set 4 of 10*
The error I am getting is *Product Information not Valid*
I can boot to Ubuntu / Mojave (dual booting linux and hackintosh)


I only have Ubuntu 22 and MacOS Mojave as dual boot on this notebook. I did not install Windows but I can find an extra hard drive to install Windows if needed.

I just want to know what tool I need to use. Please help?

[psyjamm]

Re: HP DMI Tool NBDmiFit

Hello all! I have HP Probook X360 11 G3 EE laptop with problem "black screen"
I reflashed the bios and now I can't add serial number by hp dmi tools, it show me error "This system board is not supported. Will not be able to set BIOS setting"
I tried versions 2.04 2.07 2.09 and 2.14
Can anyone help me please to write dmi
Thanks

[OKRPKCOMP]

Re: HP DMI Tool NBDmiFit

Today one customer gave me HP EliteBook 840 G6,
need to use DMI Tools to re-enter the details that got lost
There is any compitible tool for that model???

[Vesko356]

Re: HP DMI Tool NBDmiFit

Today one customer gave me HP EliteBook 840 G6,
need to use DMI Tools to re-enter the details that got lost
There is any compitible tool for that model???

HP BIOS Configuration Utility (BCU)

.

[OKRPKCOMP]

Re: HP DMI Tool NBDmiFit

HP BIOS Configuration Utility (BCU)

.

Salute u Sir

[MahmoudNasser]

Re: HP DMI Tool NBDmiFit

Hello, How to Use Thes Tool

[0wen]

Re: HP DMI Tool NBDmiFit

I have an HP Elitebook 8440p and I have tried both HP Bios Config Utility as well as NbDmiFit and neither one works, please help me!!

I tried Nbdmifit and all the dos programs and it gives me error 0x89 each time, what does this error mean, I also tried wndmifit and biosconfigutility and both did nothing, how do I fix it

Hello!?? Please help me!!!!!!!

[vinnipuh666]

Re: HP DMI Tool NBDmiFit

Thank You!!!

[mardul]

Re: HP DMI Tool NBDmiFit

Can I unlock the bios password without chip bios programming? Like use smc.bin. Is it possible to generate smc.bin using wndmifit?

[lin155]

Re: HP DMI Tool NBDmiFit

thank you very good

[smohamad]

hello there
idk how to manipulate bios image bin file to unlock mpm

[masteryoda]

Hello I have an Elitebook 840 g3 that recently the motherboard broke. I bought another that doesn't enable NFC am I able to use this to enable NFC on the new board I have on my laptop. If so could anyone point me in the right direction please

[xiaobu11]

Thank you