Have a heap of X1 carbon units that power up to a blank screen. I've assumed its a bios issue. The bios dump for this model doesn't seem to be common.
The board model is
LMQ-1 MB
12298-2 48.4LY07.021
I have a working dump from a good unit thats the non-touch version it is:
LMQ-1 MB
12298-2 48.4LY05.021
I have tried this on the non-working unit and it didnt work. I cleaned the ME using easycleanME to the same ME version and it didnt work. I then tried a much later ME version and the unit was able to boot however it locks up after running for a few minutes.
I'm using a flashcat to copy the chip.
Does anyone have the correct bios for this model or am I just messing things up?
Comment