hi every one, can anyone help me with this Lenovo thinkpad 13 daops9mb8e0 rev: e Type 20J2, i need to remove bios password, i tried with a new bios but the password still there
Announcement
Collapse
No announcement yet.
Help Remove thinkpad 13 daops9mb8e0 BIOS Password
Collapse
X
-
Re: Help Remove thinkpad 13 daops9mb8e0 BIOS Password
try the lenovo auto-patcher - https://www.badcaps.net/forum/showthread.php?t=87588 or the patcher by Maxpower3 at post #1089 - https://www.badcaps.net/forum/showth...=65996&page=55Last edited by SMDFlea; 08-23-2020, 08:01 AM.
Comment
-
Re: Help Remove thinkpad 13 daops9mb8e0 BIOS Password
Originally posted by biosedit View Postplz help patchs this file
Comment
-
Lenovo 13 Type 20J2 S/N LR-0B02EQ 18/03 locating BIOS chip
Hi All,
Need help in locating BIOS chip on the motherboard of Lenovo 13 Type 20J2 S/N LR-0B02EQ 18/03.
There is a small cmos battery on the bottom side of the board. Upon removing battery can see two MXIC 8 pin ic's.
1) MXIC 25L80006E
2) MXIC 25V10358
Dumping first one only has 1mb of data. And does not look right.
By the way. Laptop has BIOS password set to get in to BIOS only. At the moment having difficulty locating BIOS chip on the physical mainboard.
Any help is appreciated.
Thanks
Comment
-
Hi
Glad to be here badcaps!
We have couple of machines, Lenovo Thinkpad X13 Gen1 which have BIOS lock password. Just want to ask if someone can post the manual/steps how to use the software autopatcher? I read through the forum, most of people are sharing the experience, however no one post the steps on how to use the software. I already download the patcher which is a CMD file, but that is, I really have no idea hwo to move forward. Thanks in advance if anyone can help.
Comment
-
Originally posted by TekDepot View PostHi
Glad to be here badcaps!
We have couple of machines, Lenovo Thinkpad X13 Gen1 which have BIOS lock password. Just want to ask if someone can post the manual/steps how to use the software autopatcher? I read through the forum, most of people are sharing the experience, however no one post the steps on how to use the software. I already download the patcher which is a CMD file, but that is, I really have no idea hwo to move forward. Thanks in advance if anyone can help.
Hi, think that is patcher is not exist. Password is stored in MEC1663 chip and you have to do with SVOD or to fallow procedure on link:
https://www.badcaps.net/forum/troubl...-ec-pwd-bypass
Somewhere in this topis is scheme what signals on motherboard you should to connect with GND and in whitch moment.
https://www.youtube.com/watch?v=kaRdq-tnJdU
Here, you can see when
.
Comment
Comment