Hallo ,
I do have a problem regarding my HP 8770w.
I have replaced the motherboard with a new one, but lost information (S/N, SKU, CT Board...) and MPM is locked.
Using WNDMIFIT Tool to Program DMI need to unlock MPM , NbDmiFit tool DOS not work model mothrboard not supported.
Does anybody know how to get it unlocked again ?
I've read something about clean ME region , I have extracted BIOS with flashtool , with ME region injector tool have clean ME region , but after flash , my motherboard is not Manufacturing Mode 1 of 10 .
I then pulled a clean ROM image from new chip ,with flashrom and MPM is locked... and ME region not upgrade firmware .
I get the error below on the problem system:
Cannot locate hardware platform identification
This program cannot be run on the current platform
UEFI NbDmiFit
ME state configuration ;
Vpro disabled
Managment Engine FW issue
Descriptor locked
Any idea?
Thanks
Regards Devid
I do have a problem regarding my HP 8770w.
I have replaced the motherboard with a new one, but lost information (S/N, SKU, CT Board...) and MPM is locked.
Using WNDMIFIT Tool to Program DMI need to unlock MPM , NbDmiFit tool DOS not work model mothrboard not supported.
Does anybody know how to get it unlocked again ?
I've read something about clean ME region , I have extracted BIOS with flashtool , with ME region injector tool have clean ME region , but after flash , my motherboard is not Manufacturing Mode 1 of 10 .
I then pulled a clean ROM image from new chip ,with flashrom and MPM is locked... and ME region not upgrade firmware .
I get the error below on the problem system:
Cannot locate hardware platform identification
This program cannot be run on the current platform
UEFI NbDmiFit
ME state configuration ;
Vpro disabled
Managment Engine FW issue
Descriptor locked
Any idea?
Thanks
Regards Devid