Lenovo Thinkpad L15 (CPU 10th Gen) Supervisor Password

[Vesko356]

Re: Lenovo Thinkpad L15 (CPU 10th Gen) Supervisor Password

Vesko,

Author of this topic ask about password and how to recover it. Seems he made a post in wrong part of forum, as he didn't made bios request, but password removal help.
I continue discussion of how to remove password.
I didn't upload bios file at all, so i think this is missunderstanding.

This topic is about Lenovo Thinkpad L15 Supervisor Password removal, if your request is about this model OK, if not you are off topic here, that's why you must provide the data I've asked for as per the rules.

.

[ymifdal]

Re: Lenovo Thinkpad L15 (CPU 10th Gen) Supervisor Password

Please help with connection of RT809H.
With auto-ISP it shall connect without problem?

RST cable shall be connected?
There is somwere 10K resistor to switch to able programming?

I made schematic fot ISP/JTAG, can someone confirm?
reupload with small image

Could somebody confim this is working with Lenovo L15 gen 1 ?

[ibo]

Re: Lenovo Thinkpad L15 (CPU 10th Gen) Supervisor Password



Hello sir can you upload video or picturs how to read the i/o on this model using
svod4 please

https://www.youtube.com/watch?v=dK4lJMtNS-Y&t=315s

[ssdd]

I am able to read the EC for L15 Gen1 with SVOD4. Can someone assist me on how to remove supervisor password. I have tried yoga x390 (x13 to confirme )nuvoton npce288/388 sv password removal guide with svod4 and it did not work for me.

Attached is my EC dump.

[SMDFlea]

Post the laptop serial number - https://www.badcaps.net/forum/troubl...before-posting

[ssdd]

Model:20U8S1BP00
S/N:PF24DLQR

[hoaca388]

Model:20U8S1BP00
S/N:PF24DLQR

Try this file

[ymifdal]

Could somebody confim this is working with Lenovo L15 gen 1 ?

Is there any way to read the EC for this model my friends using the RT809H?

[ssdd]

hoaca388, tried your file and it's still not working. Now I am not able to power up the laptop. I have verified that I do have power.

[ssdd]

ymifdal, I am not familiar with RT809H. If your RT809H software support NUVOTON chips, and the programmer support 1.8V and I don't see why RT809H cannot read/write. Just map the RT809H pins to keyboard pins.

[ssdd]

Anyone know if there is an instruction how to removal supervisor password from EC dump for Lenovo L15 Gen1?

[ymifdal]

ymifdal, I am not familiar with RT809H. If your RT809H software support NUVOTON chips, and the programmer support 1.8V and I don't see why RT809H cannot read/write. Just map the RT809H pins to keyboard pins.

rbvndonh already matched the pins I guess in post # 78
All is remaining is locating the pull up resistor to be able to test read/write

[ssdd]

If the pull up resistor is in question I would look at the NUVOTON chip specs and other programmers specs to see their requirement to perform read/write. I know there is a lot of research/homework that need to be done here unless someone here at the Badcaps.net have a solution for you.

[Maxpower3]

hoaca388, tried your file and it's still not working. Now I am not able to power up the laptop. I have verified that I do have power.

try
or
https://www.badcaps.net/forum/troubl...75#post3259075

Anyone know if there is an instruction how to removal supervisor password from EC dump for Lenovo L15 Gen1?

Clear Password NPCE68AP
3C420 to 3C45F and 3D420 to 3D45F

[rbvndonh]

I tried to comminicate, but RY809h don't have this chip in list of available chips. Auto dont work, so maybe resistor switch is required.

I think buying RT809H instead of SVOD was one of my biggest fault lat years.

[pjpl]

Clear Password NPCE68AP
3C420 to 3C45F and 3D420 to 3D45F

Maxpower3 could You explain, what exactly does mean numbers above?

[zinnou]

help lenovo l15 gen 1 nouvton password
TP00121E

[Ghost18_07]

Maxpower3 could You explain, what exactly does mean numbers above?

They are from offset when you read the EC file by a hexadecimal program like HxD . so you need to clear between those numbers.

[Ghost18_07]

help lenovo l15 gen 1 nouvton password
TP00121E

Hi, can please tell us how did you exract the EC file ? and with what . thanks in advance .

[Mahesa09]

you should look at my posts, once I made a file for L14/15, there was an error but he managed to enter the setup and do F9. but I don't know anymore or know

hy max, why to read l14 npce68 the file is blank

[Ghost18_07]

hy max, why to read l14 npce68 the file is blank

Try by lowering the speedSPI to 3ms . that's solved mine. btw, leave the battery in so when you plug the adapter the laptop don't turn ON , good luck.