---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
I dont find it inside software and i add it in VERTAYNOV 3 but it can t read it
i have the same mathoerboard with two controller IT8227E-192 CXA and IT8176FN-56A
i need to flash IT8227E-192 CXA with vertyanov 3
is there someone programmed this controller here ???
I dont find it inside software and i add it in VERTAYNOV 3 but it can t read it
i have the same mathoerboard with two controller IT8227E-192 CXA and IT8176FN-56A
i need to flash IT8227E-192 CXA with vertyanov 3
is there someone programmed this controller here ???
You can't program the IT8227E through kb socket because pins are not routed. You have to solder pin to pin.Or desolder the IO and program it outside.
You can't program the IT8227E through kb socket because pins are not routed. You have to solder pin to pin.Or desolder the IO and program it outside.
Hi, I´m trying to program the IT8227E with a RT809H programmer on a Lenovo board NM-B931.
I´ve set up the lines according to the schematics and connection is made with a 24pin flat-cable. (see pictures).
Unfortunately I get a error message when I try to read this chip. I´m curious if this chip is really not programmable via the keyboard connector. If I measure with my multimeter I get a connection between the EC and the pins on the KB-connector...
Comment