Good day Everyone, I need a working bios for HP Laptop 14-dq0001dx
BOARD IDA0PAMB46A0 REV:A MODEL: 0PAB please.
Go to the HP drivers support site and enter the laptop serial number,download the bios updater,run the exe ,it will give you the option to save the bios to a location.
Go to the HP drivers support site and enter the laptop serial number,download the bios updater,run the exe ,it will give you the option to save the bios to a location.
Good day sir, I have downloaded it from HP drivers site. But there is no option to save the bios to a location Sir.
Go to the HP drivers support site and enter the laptop serial number,download the bios updater,run the exe ,it will give you the option to save the bios to a location.
how to convert sir in bin file the downloaded files. thank you very much
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------​
Attach files directly to your post instead of linking to external websites
Post what the problem is, be specific, - black screen, no boot, running slow, password.Do NOT post "clean me", "clear bios", "clean bios", "bios need" or other such terms
Thank you for your responses, I will read through everything. I am new to the forum. The issue I have is that the computer starts, the screen is black, and the Caps Lock key flashes 3 times quickly and 5 times slowly. Thanks in advance for your help
Thanks ! I tried flashing with Neoprogrammer, and I got this error message:
Current programmer: CH341a
11:51:17
Programming memory(verifying)... Main Memory
Verification error on address: 0x00000000, Device: 0x00, Buffer: 0x01
Execution time: 00:00:00.026
Thanks ! I tried flashing with Neoprogrammer, and I got this error message:
Current programmer: CH341a
11:51:17
Programming memory(verifying)... Main Memory
Verification error on address: 0x00000000, Device: 0x00, Buffer: 0x01
Execution time: 00:00:00.026
Which voltage should I use for flashing? 1.8V or 3.3V?
Attach files directly to your post instead of linking to external websites
Post what the problem is, be specific, - black screen, no boot, running slow, password.Do NOT post "clean me", "clear bios", "clean bios", "bios need" or other such terms
Comment