Need toshiba dablgdmb8d0 rev d bios

[bilen]

Part number : Psk6re

[bilen]

Re: Need toshiba dablgdmb8d0 rev d bios

Part number : Psk6re

help? nobody?

[SMDFlea]

Re: Need toshiba dablgdmb8d0 rev d bios

help? nobody?

Backups ?

[Repdata]

Re: Need toshiba dablgdmb8d0 rev d bios

testen

[zenny95]

Re: Need toshiba dablgdmb8d0 rev d bios

Try

[lrservicios]

Re: Need toshiba dablgdmb8d0 rev d bios

Try

Thank you this is Working For DABLGDMB8D0 REV : D bios

[Quemasda24]

Hi,

Also working on a TOSHIBA Psk6re with motherboard DABLGDMB8D0 REV D. I have loaded both EC and main BIOS. The system turns on, all voltages working but no image and the system turns off. Any other possible bios files for this MB?

Regards!

[SMDFlea]

post your backups and laptop serial number https://www.badcaps.net/forum/troubl...before-posting

[Quemasda24]

These are the actual bios (back.rar). It turns on, activates all the power supplies, cpu and gpu got warm but no image and turns off. When received it was manipulated and got some bios (Original BIOS.rar) with which cycled over 3 times turning on and off. Its serial is 4B239018W.

[Quemasda24]

I reprocessed zenny95's files for the main with clean ME. No change, basically same response. It seems like if part of bios is correct but not the rest, got stuck and turns off. Any hint?

Regards!

[Quemasda24]

help? nobody?

[kalilinux25]

help? nobody?

I think your two zip files of bin is not same of your serial number 4B239018W

because the back.rar its a TOSHIBA SATELLITE L750 PSK6ME-02E004EN SN:4C100446W
and the Original BIOS.rar is TOSHIBA SATELLITE L750D PSK4UE-00V010RU SN: 7B515843W

What is the motherboard code ? DA0BLBMB6F0 REV F0?

[Quemasda24]

Thnak u for the feedback! The MB is a DABLGDMB8D0 REV D, the laptop model is psk6re-01300yce from TOSHIBA. Based in th thread it seems Zenny95's bin files worked for this motherboard. Any hint how could I get the righ bios for this unit?

[kalilinux25]

Thnak u for the feedback! The MB is a DABLGDMB8D0 REV D, the laptop model is psk6re-01300yce from TOSHIBA. Based in th thread it seems Zenny95's bin files worked for this motherboard. Any hint how could I get the righ bios for this unit?

that will be ok if the unit is functioning now

[Quemasda24]

Sadly it turns off after a few seconds into boot. All the voltage reels seem ok but no VCC to the LCD. Starting to think it might have an issue with the GPU. Thank you for your comments.