toshiba c850

[amroo2041]

hi every one
i have toshiba satellite c850 need bios i tried maybe 5 bios but its different
some one working power no display some one not working i will upload original file need help please

[DanielDacko]

Re: toshiba c850

Board number?

[amroo2041]

Re: toshiba c850

Board number?

plf/plr/csf/csr uma mb rev 2.1 pcb

i searched with board number but all file i downloaded not working

[satishkumar]

Re: toshiba c850

[quote=amroo2041;1137050]plf/plr/csf/csr uma mb rev 2.1 pcb

i searched with board number but all file i downloaded not working

[DanielDacko]

Re: toshiba c850

https://www.badcaps.net/forum/showthread.php?t=56249

https://www.badcaps.net/forum/showthread.php?t=81265

[amroo2041]

Re: toshiba c850

[QUOTE=satishkumar;1137100]

plf/plr/csf/csr uma mb rev 2.1 pcb

i searched with board number but all file i downloaded not working

thank you for your help its working

[satishkumar]

Re: toshiba c850

[QUOTE=amroo2041;1137387]

thank you for your help its working

[newfoxinformatica]

Re: toshiba c850

[QUOTE=amroo2041;1137387]

thank you for your help its working

cONGRATULATIOSN... Dual bios

Working ?

Which one of the duas worked for your model?

[newfoxinformatica]

Re: toshiba c850

[QUOTE=satishkumar;1137401]

[englez]

Re: toshiba c850

Dual bios worked,thank you!

[aliiash]

toshiba c850 no power

Hi
I have toshiba c850 . its was worked ok but there is password on bios . I tried programmed bios chip with a tested file but its stooped of work . I re programmed with old back up file but no power too .
I need for help please

this is old back up file
https://www.badcaps.net/forum/attach...1&d=1674650714

[hardware1]

Re: toshiba c850 no power

Hi
I have toshiba c850 . its was worked ok but there is password on bios . I tried programmed bios chip with a tested file but its stooped of work . I re programmed with old back up file but no power too .
I need for help please

this is old back up file
https://www.badcaps.net/forum/attach...1&d=1674650714

Here's your Unlocked Bios, hope it works fine.
I think your Backup doesn't work because it was 1KB (300h) larger.

[aliiash]

toshiba c850 bios file

Hi
please please please I need to toshiba PLF/PLR/CSF/CSR UMA MB REV:2.1 bios bin file . I tried to programmed the chip with several different files, but all the files that I downloaded do not match the original file of the device. I would like a test file please .

Note : The motherboard contains only one chip. The file size is 4 MB. There is a place for the EC chip next to the main chip, but it is not found .

this is original bios file
https://www.badcaps.net/forum/attach...1&d=1674932921

[SMDFlea]

Re: toshiba c850 bios file

Hi
please please please I need to toshiba PLF/PLR/CSF/CSR UMA MB REV:2.1 bios bin file . I tried to programmed the chip with several different files, but all the files that I downloaded do not match the original file of the device. I would like a test file please .

Note : The motherboard contains only one chip. The file size is 4 MB. There is a place for the EC chip next to the main chip, but it is not found .

this is original bios file
https://www.badcaps.net/forum/attach...1&d=1674932921

Try the 2nd bios at post #4 .The single version is for win 7 ,the dual is for win 8 .You could use a 2MB chip and flash the dual ones.

[Mohammden]

toshiba c850-b098

I need bios of motherboard toshiba
plf/plr/csf/csr uma mb rev 2.1
the motherboard has just one ic bios w25q32

[Mohammden]

Re: Toshiba C850 PLF/PLR/CSF/CSR UMB MB REV:2.1 - BIOS

i need to fix this bios of c850-a965
motherboard plf/plr/csf/csr uma mb rev:2.1

[AmeenNeo]

Re: toshiba c850 bios file



Try the 2nd bios at post #4 .The single version is for win 7 ,the dual is for win 8 .You could use a 2MB chip and flash the dual ones.

i have the same problem and i tried the single version but it did not work , if i try ur second solution and come up with a 2mb chip, what about the resistors around it ?

[TECHO TN]

[QUOTE=satishkumar;n1661788]Re: toshiba c850

plf/plr/csf/csr uma mb rev 2.1 pcb

i searched with board number but all file i downloaded not working

Work thank you