the mother number is
osamu2_BT_HPC MV_MB_v1
osamu2_BT_HPC MV_MB_v1
-
-
Re: pls Schematic for hp 15-d041TU
enjoy -
Re: pls Schematic for hp 15-d041TU
many....many ...thanksComment
-
Re: pls Schematic for hp 15-d041TU
mr highpulse
i have found in pin 1 and pin 8 1.8volt and i must found 3.3v
i dont know why ؟Comment
-
Re: pls Schematic for hp 15-d041TU
no KADI .
2 problems
first to reflash this bios , you flasher must support 1.8volts bios , if not you must make or buy a adapter and chek if your flasher database is up to date .
in your case the bios will be feeded at 1.8 volts so everything is ok here .
now when you flashed the bios , everything was ok ? no errors ?Comment
-
Re: pls Schematic for hp 15-d041TU
Thank you very much for the fileComment
-
Re: pls Schematic for hp 15-d041TU
Does anyone have a schematic please.Comment
-
Re: pls Schematic for hp 15-d041TU
Pls hp 15 (da0u81mb6c0)no power on the board I have changed charger but still no power but the charger works on different laptop I have remove the board but I don't know where to start looking for the problem please help me .thanks in advance
I have checked the power Jack is working well.Comment
-
Re: pls Schematic for hp 15-d041TU
Mido1, you need to learn how a computer starts up. Look for start up sequence or power-on sequence of a laptop on youtube. Excellent video in Spanish is here:
https://www.youtube.com/watch?v=OAA74zy-lzI
There are others in English but hard to understand, strong Indian accent.:
https://www.youtube.com/watch?v=BrsZGFCIqrYComment
-
Re: pls Schematic for hp 15-d041TU
Thanks for the reply it really helped.Comment
-
Re: pls Schematic for hp 15-d041TU
need OSAMU2_DIS_KB_HPC schematic pleaseComment
-
Re: pls Schematic for hp 15-d041TU
GraciasComment
-
Re: pls Schematic for hp 15-d041TU
I need the hp 15- d041TU layout. Please, can someone help meComment
-
Re: pls Schematic for hp 15-d041TU
thanks my sweet hearttttttttttttt
Comment
-
Re: pls Schematic for hp 15-d041TU
schematics ????????????Comment
-
Hey everyone,
I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.
Instead, here's what's been bugging me so far:
The schematic... -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this... -
Had one of these come in for repair with a blown battery and a WiFi issue, battery has been replaced with genuine battery (twice) and won't take a charge works fine on AC, WiFi issue gone away. Looking for a schematic so I can trace the charger circuit UM562F is only one I can find, this is the 562AI model.Had a unit come in for repair — 562AI model — with a blown battery and WiFi issue. WiFi fault has cleared, but battery won’t charge despite replacing it twice with genuine parts. Device operates fine on AC power. Suspect charger circuit fault. Only schematic I’ve found so far is for...06-26-2025, 02:41 PM -
The Schematic and BoardView( *.cad ) of MSI Z390 A-PRO , the board model no is MS-7B98 Rev1.0-1.1 ....
-
Please help, i need schematic diagram for Dell inspiron 3537 board LA-9982P rev 3.0 (A02). Specific for A02.
I have a one beep with no display problem. Did reprogrammed the bios but no luck. i tried to troubleshoot using rev 3.0 (A08) version schematic and boardview but there's components/rails in the schematic that is none in my actual board, this is why I'm having problem checking every power rail needed if ok. attached is the photo of my actual board.
I'm not sure if A02 and A08 is really different schematic version from each other, but I have to try....
Comment