Announcement

**japlytic** · 10-19-2012, 08:17 PM

Re: the gutless, bloated, and fried power supply hall of shame

This morning when I was at my computer, I heard a hissing sound and thought it was my monitor (which appears to be on its last legs), but I found out that it was a plugpack, DVD model DSA-0131F-05 and upon opening, a bulging 22uF 400V Jamicon TK (105C) unit was found.

The particular unit is of the self-oscillating type, secondary capacitors are 680uF 10V Jamicon WG (before and after output inductor), and as in the picture, the fuse is crossing the secondary side, even though it has heatshrink on it.

Has anyone else seen a bulging 400/450V Jamicon unit, especially if it is on the primary side?

Attached Files

**Behemot** · 10-20-2012, 12:18 AM

Re: the gutless, bloated, and fried power supply hall of shame

If it is cooking itself in its own juices, than it is no surprise it has gone bad…how long was it working?

**japlytic** · 10-20-2012, 02:58 AM

Re: the gutless, bloated, and fried power supply hall of shame

Honestly, I have no idea.
I meant DVE, not DVD.

**ben7** · 10-20-2012, 07:42 AM

Re: the gutless, bloated, and fried power supply hall of shame

Originally posted by japlytic View Post

Honestly, I have no idea.
I meant DVE, not DVD.

Ah yes, I have a few DVE brand adapters. I think all of them are transformer based, not SMPS.

Did the hissing come from the capacitor exploding?

You should blow up the capacitor :P

-Ben

**Pentium4** · 10-22-2012, 01:49 PM

Re: the gutless, bloated, and fried power supply hall of shame

Here's a delicious Deer for you guys to admire

In these, when the sleeve bearing fan dies, they ALWAYS keep running until the switching transistors blow. I've seen 6 of them die and it's the switchers every time, as well as all the YC caps bulging

Attached Files

**Wester547** · 10-22-2012, 01:53 PM

Re: the gutless, bloated, and fried power supply hall of shame

Damn... that's a 28 size transformer there. Talk about pathetic....

On the other hand, many PSUs don't have over temperature protection, in all fairness, so they too continue to run when a fan seizes. But if the switchers die from a seized fan if you're not even running the PSU at even half its capacity then they must be pathetic as well.

**Behemot** · 10-22-2012, 02:06 PM

Re: the gutless, bloated, and fried power supply hall of shame

Originally posted by Pentium4 View Post

Here's a delicious Deer for you guys to admire

In these, when the sleeve bearing fan dies, they ALWAYS keep running until the switching transistors blow. I've seen 6 of them die and it's the switchers every time, as well as all the YC caps bulging

Is the label 350 W at least?

I just hope thats B0S, not BOS on the transformer, if Brotherhood of Steel made such a crap, that would ruin all my belief in them

**Pentium4** · 10-22-2012, 02:57 PM

Re: the gutless, bloated, and fried power supply hall of shame

Yeah it happens to these things a lot

The label claims 250W. 192W on the 12V. Looks like B0S

**Behemot** · 10-22-2012, 03:12 PM

Re: the gutless, bloated, and fried power supply hall of shame

Thats not bad, it even looks it can do 200 W continuous, 250 W maybe. Expected more generous label

**goodpsusearch** · 10-22-2012, 03:15 PM

Re: the gutless, bloated, and fried power supply hall of shame

They are getting better.

**Pentium4** · 10-22-2012, 03:29 PM

Re: the gutless, bloated, and fried power supply hall of shame

They definitely are getting better. They need to at least put a ball bearing fan in there though. And fix the fan controller. The fan spins at the same speed at <50W as it does when it's pulling over 150W and it starts to get pretty hot.

**Behemot** · 10-22-2012, 03:29 PM

Re: the gutless, bloated, and fried power supply hall of shame

Well it's not so surprising after all, you can get 550W OCZ ZS with 80+ bronze certifications for some 55 USD…

**Pentium4** · 10-22-2012, 03:32 PM

Re: the gutless, bloated, and fried power supply hall of shame

Originally posted by Behemot View Post

Well it's not so surprising after all, you can get 550W OCZ ZS with 80+ bronze certifications for some 55 USD…

That's pretty good. Here is the exact PSU on Newegg, overpriced if you ask me. http://www.newegg.com/Product/Produc...Power-Supplies

**Behemot** · 10-22-2012, 04:04 PM

Re: the gutless, bloated, and fried power supply hall of shame

Ah, it's SFX than? These are generally pricier…

**PeteS in CA** · 10-22-2012, 08:46 PM

Re: the gutless, bloated, and fried power supply hall of shame

Looks like B0S

Maybe POS, Piece Of ...

I would guesstimate it at 150W-200W. Wasn't 185W common in that case size? It actually has an input filter on the AC side. OTOH, the O/P caps are all extra well done!

**Pentium4** · 10-22-2012, 11:18 PM

Re: the gutless, bloated, and fried power supply hall of shame

Originally posted by PeteS in CA View Post

Maybe POS, Piece Of ...

I would guesstimate it at 150W-200W. Wasn't 185W common in that case size? It actually has an input filter on the AC side. OTOH, the O/P caps are all extra well done!

Hahaha

I actually have one being used for a linux box (requires around 100W continuous, around 160W under load) I recapped it and put a ball bearing fan in there. Just to see if the little bugger can last with a little upgrade

**Behemot** · 10-23-2012, 12:55 AM

Re: the gutless, bloated, and fried power supply hall of shame

It's actually pretty tough to get something usable in SFX factor, at least here. Everything is expensive and the best thing you can usually buy is something from FSP Group, full of crappy caps anyway.

**ttn328** · 10-24-2012, 01:29 AM

Re: the gutless, bloated, and fried power supply hall of shame

VENR (fake ?) 450S-ATX

No EMI filter. Primary caps : Fhy 330uF - 200V x2 85C
Two transistors 5VSB: C945, D13003
Main switcher: D13007 x2. Very small main tranformer.
Secondary:
Rectifiers: S16C40C x2, F12C20C. No pi filters.
DC filter caps: 1000uF - 16V x3 , 470uF - 16V, 1000uF - 16V (5VSB), all BH 105C.
PWM controller : HS8108.

Attached Files