This PSU was pulled from a faulty 42" Philips LED TV.
TV was not turning on. I was told that it has been damaged from lightning.
Here is a Pic of MY PSU:
For better view pls check out this page
First of all i´d like to know why there are so many missing components (and heat sinks) on my board, especially on the primary side. The serial numbers match exactly.....
Don´t mind the 5 missing FETs on the secondary side. I removed them for testing....They are fine.
Here is what i found so far:
Primary seems to be ok. On the output, there is no 5v standby voltage. The 12v rail has a short to ground.
Any help appriciated
TV was not turning on. I was told that it has been damaged from lightning.
Here is a Pic of MY PSU:
For better view pls check out this page
First of all i´d like to know why there are so many missing components (and heat sinks) on my board, especially on the primary side. The serial numbers match exactly.....
Don´t mind the 5 missing FETs on the secondary side. I removed them for testing....They are fine.
Here is what i found so far:
Primary seems to be ok. On the output, there is no 5v standby voltage. The 12v rail has a short to ground.
Any help appriciated
Comment