LG 60PV450-UA Testing Main Board

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • weimars
    Member
    • Dec 2013
    • 13
    • United States

    #1

    LG 60PV450-UA Testing Main Board

    I've got an LG 60PV450 plasma that I'm diagnosing a no picture problem, but has sound.

    INFO:
    The voltages are all in spec.
    The tv powers on and stays on with sound transmitted.
    In a dark room you can see that the screen does have a glow to it.
    I have used a jumper on the CTRL board to get test patterns (w/ the LVDS cable disconnected) and the patterns display with no lines and look excellent.

    QUESTIONS:
    Do I conclude that the CTRL board is fine considering the results of the test pattern?
    How do I test the main (input) board to confirm it's the source of the problem?
    Thanks!
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: LG 60PV450-UA Testing Main Board

    There is a rare chance the control board is bad, if its input circuit is bad.

    The main board is most likely the cause.

    Without an oscilloscope you can't test the signals between the main and control to see which could be bad. So you would have to try both.
    Last edited by tom66; 12-13-2013, 10:56 AM.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • weimars
      Member
      • Dec 2013
      • 13
      • United States

      #3
      Re: LG 60PV450-UA Testing Main Board

      I tried a replacement control board and it has the same problem with nothing changed. So I've ordered a replacement main board and hopefully that'll solve the problem. I'll update when I give it a go.

      Comment

      • weimars
        Member
        • Dec 2013
        • 13
        • United States

        #4
        Re: LG 60PV450-UA Testing Main Board

        UPDATE:

        I went ahead and bought a new main board for this tv, since my replacement control board didn't seem to change anything, and it works like a dream! I've had it on during the day now for about 3 days and it has performed flawlessly. I actually think it has a pretty good picture.

        Thank you tom66 for your reply and thinking the problem through with me!

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: LG 60PV450-UA Testing Main Board

          Glad to hear! Enjoy your TV.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • jerrmrz
            New Member
            • May 2014
            • 1
            • United States

            #6
            Re: LG 60PV450-UA Testing Main Board

            I have the same tv with no picture but has sound..... first started showing signs of possible burn in on top and bottom of screens but now if black with grey patterns on screen.... unable to get a test signal

            Comment

            • GTech6261
              New Member
              • Jul 2014
              • 3
              • USA

              #7
              Re: LG 60PV450-UA Testing Main Board

              I have a LG60PV450 with no picture or sound. A service tech says (for an 85$ service call) it is the XMain board but since none can be found, I should just trash it and buy a new TV! It is only 30 years old, I dont mind risking it with a used board if anyone knows how to find one?

              Comment

              • GTech6261
                New Member
                • Jul 2014
                • 3
                • USA

                #8
                Re: LG 60PV450-UA Testing Main Board

                I meant 3 years old..

                Comment

                • chancleta
                  New Member
                  • Apr 2014
                  • 4
                  • Puerto Rico

                  #9
                  Re: LG 60PV450-UA Testing Main Board

                  I have a LG60PV450 with no picture or sound. i test the buffer board and it seem to be ok the only thing that i see is the blinking led on the t com board can some body can help me ???

                  Comment

                  Related Topics

                  Collapse

                  • Dani_2024
                    Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                    by Dani_2024
                    Hi and thanks in advance for any input you might provide!
                    I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                    Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                    Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                    10-28-2024, 05:06 PM
                  • jb_Bak
                    Sony xbr-65x900c main board issues?
                    by jb_Bak
                    Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                    Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                    Power Board Connector that goes to Main board
                    CN6401
                    Pin 01 NC
                    Pin 02 NC
                    Pin 03 "BL_ON": 0V
                    Pin 04 "N/C"
                    Pin 05 "STBY 3.3V": 3.5V
                    Pin 06 "GND": N/C
                    Pin 07 "AC_OFF"...
                    09-27-2021, 04:52 PM
                  • JDC
                    (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                    by JDC
                    ONN 100012588
                    Issue: No Power, Then Rebooting After Main Board Change

                    Short answer: replace main board and power board
                    Technical answer: replace main board and Q306 & Q307 on power board.

                    Long answer:

                    TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                    07-15-2022, 07:39 AM
                  • m1ch43lzm
                    HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                    by m1ch43lzm
                    Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                    Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                    05-12-2025, 08:37 PM
                  • cheeky2
                    Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
                    by cheeky2
                    I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
                    Obviously the same LVDS connector for the screen connection...
                    05-25-2024, 03:27 AM
                  • Loading...
                  • No more items.
                  Working...