Hello, I am asking for help. After connecting the power supply, the TV will first blink once and then after a few seconds it will blink 4 times. All voltages on the motherboard are OK, but when there is a cyclical one blink the voltages 3.3V, 0.9V, 1.5V, 12V on the L80 coil also reset. So this x1 blink is like Reset_SYS and then it's x4 blink. Where to look for the problem? There is no Service Manual, I rule out the problem of bios on IC401 because I have already done it. I found descriptions of SOS on the Internet and 4 x blink is Power SOS P Board Help. Regards
Announcement
Collapse
No announcement yet.
SAMSUNG UE32T5372AU
Collapse
X
-
Have to rewrite the flash memory, check http://www.badcaps.net/forum/trouble...eed-eprom-dump here for the dump
-
Originally posted by SzymonB View PostAnother question: can someone send me a dump from the IC503 24C512 memory? Because I noticed that even when I have it desoldered, the board behaves exactly the same. Maybe it's worth trying to change the eeprom input
Comment
Comment