Guide : Philips OLED TVs how to remove the protection mode NVM.EED

[Diah]

OLED Cells over all OLED brands are easily its drooping more currents will be increase which it trick the SOS signal which T-CON driver boards will send to the Mainboards... the NVM software on the Mainboards will shutdown the PSU..

not all fault at OLED are bad-- some issue can remain working with minimal issue at displaying generate

Philips OLED TVs. we can switch the protection code to off via binary.
- ropy it on empty usb stick and insert it while the tv off at USB 1
-turn on the Tv it will restart 2 or 3 time then plug out the stick and turn on the tv.after it finishing from restart... .. it should got out from the protection issue.

[lotas]

Это относится к шасси TPM19.6E LA. XXPUS6XX4

[Diah]

Это относится к шасси TPM19.6E LA.

NO
its belong and can apply to these chassis
Affected Chassis: TPM19.1E LA, TPM19.6E LA, TPM19.1A LA, TPM19.1T LA, TPM20.1E
OA, TPM20.1A OA, TPM21.1E OA, TPM21.1L OA, TPM21.1A OA

[Resistor6k8]

Thanx Diah for your information. Our PHILIPS 77OLED806/12 is working again after endless LED 4x-flashing.

until then, BEN

[kozejk555]

Hi
I need NVM for 55oled803, can you halp me?

[Diah]

Hi
I need NVM for 55oled803, can you halp me?

NVM.bin you can find it here

TPM171E_2k18_N2O_NVM_v59

[kozejk555]

Thank you I find NVM for my TV. I have to rename file?

[kozejk555]

So NVM helped temporarily. Now I have an image, and the TV starts to load. However, it always crashes, and the process repeats. When I remove the USB, I lose the image again.

[Diah]

So NVM helped temporarily. Now I have an image, and the TV starts to load. However, it always crashes, and the process repeats. When I remove the USB, I lose the image again.

you wrote NVM and the file i send you are NVM.bin... if you need to remove the protection need NVM.eed
firmware Android TV 8 Oreo (TPM171E: 107.1.143.0 as i know it had already the protection disabled .. so downgrade and disable the auto update.
search in this archive Firmware from Alex

[kozejk555]

i downloaded autorun.upg version 107.1.143.0 and the TV won't update. Only PKG files seem to work. I don't know where the problem is. I am also sending the log

[Diah]

upgrade_loader.pkg u need you have it on the site.

here download and unzip... copy upgrade_loader.pkg on USB formatted FAT32 MBR mode

[kozejk555]

there is only autorun.upg. I must rename this autorun.upg on uprage_loader..pkg???

[Diah]

there is only autorun.upg. I must rename this autorun.upg on uprage_loader..pkg???

what are you talking .... the link in post #11 are direct download and when you unzip it you will have upgrade_loader.pkg

if you download dont know how,,,, so how you will be able to fix OLED !!!

[kozejk555]

sorry I´m idiot. I got it

[kozejk555]

how long does the upgrade process take? It's been running for me for 20 minutes

[kozejk555]

Bro, my type of tv is TMP18.1ELA your firmware is for TMP17. Do you have for my type?

[Diah]

Bro, my type of tv is TMP18.1ELA your firmware is for TMP17. Do you have for my type?

where do you have this false Info... yours 55OLED803 TPM171E from year 2018 , firmware 100% correct.

[lotas]

Not everything depends on the region.But their firmware number is TPM171E_xxxxx

[Diah]

Not everything depends on the region.But their firmware number is TPM171E_xxxxx

exactly.. HW from year 2018.. as i wrote but Firmware still from 2017. so we call it all HW years to its original Firmware TPM171E, even there are HW from 2019 too

[kozejk555]

I have NVM.BIN and TPM171E_107.1.143.0 firmware loaded on usb. If I leave the USB in the TV, the firmware is constantly updated, even for an hour. If I remove the USB, the TV turns off and indicates an error. I don't know how to continue.