Announcement

Collapse
No announcement yet.

Strange LG TV issue : Image vertical lines in black screen

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Strange LG TV issue : Image vertical lines in black screen

    Hi

    Asking for a friend.

    I'm used to black vertical line in otherwise good image - probable solution is a rubber to push and tighten the COFs bonding.
    but here its the opposite !

    TV has new T-con = same issue
    A missing panel voltage would have global effect

    So , what should one do ? how can I find where the fault is ?

    Thanks !
    Attached Files

    #2
    Panel short it appears. I would say it's dead.

    Comment


      #3
      Thx EazyBone

      Turns out the guy has 3 ( 3 ) of that Model with SAME issue. I asked him to note the production date , might be (emerging) known issue.
      For now , I sent him to look for fluctuating VGH VGL LCx..

      Comment


        #4
        this LG EBT64022702 Main Board with ONE SoC knowing issue with BGA at SoC

        Comment


          #5
          Originally posted by Diah View Post
          this LG EBT64022702 Main Board with ONE SoC knowing issue with BGA at SoC
          It'll cause lines like that?

          Comment


            #6
            It can, many things can make strange lines, bad tcon, bad cap, tvs diode etc.

            Comment


              #7
              Originally posted by EazyBone View Post

              It'll cause lines like that?
              yes. exactly these lines at the middle are SoC BGA

              Comment


                #8
                Thanks Diah, I bet many tvs wound up thrown out only needing mainboard replace/repair. I remember SO many times that certain member, not Easybone but the one that always gives bad harmful advice telling everyone bad panel all the time.

                Comment


                  #9
                  Originally posted by Diah View Post
                  this LG EBT64022702 Main Board with ONE SoC knowing issue with BGA at SoC
                  Thx ! it does make sense because these are image ( production lines ) lines and not no_image ( usually dark / black ) lines.

                  Does reflowing work ? or is it a faulty IC ?

                  I'll try to reflow and report here

                  Comment


                    #10
                    test

                    Comment


                      #11
                      LG 49SM5KB

                      Reflow = No change.
                      New T-con .

                      Could it be Firmware corruption issue ( Logo appears etc ofc )
                      Attached Files

                      Comment

                      Working...