does anyone have a service manual for this guy? 32MF231D/37 found a parts list from elektrotanya but need to see the schematic for the power supply. no load its fine right at 24V. under load of the inverters its pulsing all over and flashing the screen then shuts off. can hear a buzzing from the transformer on the power supply. replaced the power supply already but it was an ebay item. doing the same thing
Announcement
Collapse
No announcement yet.
32MF231D/37 pulsing 24V under load, backlight flashing
Collapse
X
-
Re: 32MF231D/37 pulsing 24V under load, backlight flashing
https://www.badcaps.net/forum/showthread.php?t=39740
Inverter , power supply board P/N? BN44-XXXXXX?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
-
Re: 32MF231D/37 pulsing 24V under load, backlight flashing
There are four SMD MOSFETs (8-pin) on each inverter board. Can you read the P/N to get the pinout to check the Source and Drain pins for shorts?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment
-
Re: 32MF231D/37 pulsing 24V under load, backlight flashing
i repaired my own tv...(a magnavox).. that had that buzzing sound. i thought it was the transformer for the longest time till i tried a can of air. turn it upside down and spray the part you think it is. i found out it was a zener diode that was the problem. replaced it and the tv turned right on and worked. it was right under my transformer
Comment
-
Re: 32MF231D/37 pulsing 24V under load, backlight flashing
450V capacitor can go bad causing this issue, if all else tests good.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
Comment