tv will switch on and is working but,after about 15 to 45 mins the back light will go off.i have pulled the caps out [in red on pic] and checked with a cap meter,all within range,now can one of the caps go bad with heat turning the light off,leave the tv off till cool and will come back on again,have ordered new caps,is there anything that i can check that may have some bearing on the prob.the caps in red are for the inverter.
Announcement
Collapse
No announcement yet.
blaupunkt 32/147 led tv,no back light.
Collapse
X
-
Re: blaupunkt 32/147 led tv,no back light.
Possibly an intermittent LED inside the panel - worth checking voltages going to the panel, see if they stay where they are, or if they increase / decrease.
Failing LEDs are becoming a BIG issue with LED-backlit TVs... what was that about them being more reliable?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
-
Re: blaupunkt 32/147 led tv,no back light.
I think he is telling us the DCV at the LED connector when TV is in standby and when TV is on.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment
-
Re: blaupunkt 32/147 led tv,no back light.
yes it was a bad led,only one,so nothing to loose i took it off,took one off a strip i had and,it melted lol,so i bridged the gap with solder,put back together and switched on,hay presto the picture is now ok,back light is on,cant tell that one has gone.
Comment
-
Re: blaupunkt 32/147 led tv,no back light.
Wow, another set with bad LEDs. Gonna become even more common...Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
Comment