Look at this photo can some one tell me what going on here

[sam_sam_sam]

This monter started doing this the other day some time it dose this and other times it work fine

[sam_sam_sam]

Re: Look at this photo can some one tell me what going on here

This monter started doing this the other day some time it dose this and other times it work fine

It has a bunch very small line across the screen

[zdsh07p9]

Re: Look at this photo can some one tell me what going on here

LCD or Plasma? Model Number?

[sam_sam_sam]

Re: Look at this photo can some one tell me what going on here

LCD screen
I am at work right and do not have that info

This monter is hook to a dvr recorder could it be that the unit is doing this

[sam_sam_sam]

Re: Look at this photo can some one tell me what going on here

Here is the model number

[ReeceyBurger123]

Re: Look at this photo can some one tell me what going on here

Paranormal activity !

[sam_sam_sam]

Re: Look at this photo can some one tell me what going on here

Paranormal activity !

Yea Right
Or grimlin have taken over

[ReeceyBurger123]

Re: Look at this photo can some one tell me what going on here

Haha, looks like the Dvr to me. Does the monitors menus have the distortion on them when you open them ?

[sam_sam_sam]

Re: Look at this photo can some one tell me what going on here

Here is a photo of the inside of the DVR recorder
I have another DVR recorder and it shows the right way with no line or anything that not suppose to be there

I have a question about ordering the surface mount cap on this board I want order them from Digikey what would the part number be for one of them
They used very good brand KY
This DVR recorder is about 10 years old

7G ?
220 uf
6.3. Volts

[Electronic Handyman]

Re: Look at this photo can some one tell me what going on here

I'd first try another video source to be sure which device is faulty.I know that DVR's are famous for electrolytic capacitors to fail.So I change them all and use good quality Low ESR capacitors, plus if the capacitor is say 330UF 10 volt use a 330UF 16 or 25 volt capacitor in its place if possible.Just be sure that the replacements upgraded capacitors can fit the circuit and housing etc before purchasing them.

[budm]

Re: Look at this photo can some one tell me what going on here

Already try heating the board with hair dryer (cap's ESR goes down with higher temperature)? Looks like artifact due to poor power supply filtering.

[sam_sam_sam]

Re: Look at this photo can some one tell me what going on here

I'd first try another video source to be sure which device is faulty.

It is the DVR recorder the one I am showing board on
The monitor work fine on the NEW DVR recorder

[sam_sam_sam]

Re: Look at this photo can some one tell me what going on here

7G ?
220 uf
6.3. Volts

This is what it has on one of the surface mount caps that is on this board

What would the part number be from Digikey

[sam_sam_sam]

Re: Look at this photo can some one tell me what going on here

7G ?
220 uf
6.3. Volts

You can see the cap in post # 9

What would the part number be from Digikey

This tablet is act up posting two post