Corrosion on Panasinic LED 55ET5

[vz56098]

Hi,
I have a corrosion on the bottom right and bottom center boards due to water that were stored there due to wrong way of cleaning the screen.
Panasonic didn't want to repair it so I tried myself.
The symptoms were vertical lines all over the screen.
I cleaned all corrosion from the boards and now nothing is shown on the screen, including the menu (I can see that the monitor is turned on).
What can I do next? Any recommendations?

Thanks,
Gil

[dick_barton]

Re: Corrosion on Panasinic LED 55ET5

Could you supply some photo's so that someone could help you.

[vz56098]

Re: Corrosion on Panasinic LED 55ET5

Photos of the screen or the boards?
On the screen nothing is shown now (gray, but it looks like its turned on)
The boards are clean now but before i cleaned i saw the corrosion on the components.

[dick_barton]

Re: Corrosion on Panasinic LED 55ET5

The boards please.

[vz56098]

Re: Corrosion on Panasinic LED 55ET5

Ok, i will take some photos on Sunday as the TV is at my work now.
Meantime any suggestions until then are more than welcome.

Thanks a lot,
Gil

[dick_barton]

Re: Corrosion on Panasinic LED 55ET5

It's extremely possible that the water has damaged the connections to the circuit board attached to the panel and may well be unrepairable. But without seeing the photo's I cannot be sure.