I'm pretty sure it's a firmware issue. I only have ch341 programmer so i'm not able to flash the nand chip. I hope for the best or i will buy new tv. My readings into chip are most FF and some others unsignificant values. Any ideas for tv stuck on boot logo?
In this chassis, flashing eeprom (24C256) often helps from freezing on the "Smart TV" log, if it does not help, then flashing the entire set (eMMC, Spi flash and Eeprom).
I have a Samsung un55ku6290f that turns on as soon as I plug it up. There is backlight but that's it. No image or remote control functions at all. Could this be a bad bios.
The nand I need (IC8401), i thought mentioning flash would be enough.
The non working one is not relevant, the guy from whom the set is, upgraded the TV from USB stick for a different main board (LC-60LE745U) so now the lvds isn't working.
The nand I need (IC8401), i thought mentioning flash would be enough.
The non working one is not relevant, the guy from whom the set is, upgraded the TV from USB stick for a different main board (LC-60LE745U) so now the lvds isn't working.
Comment