Eeprom dump thread!

[abbassi.diag]

Re: Eeprom dump thread!

thank you very much
big work

[David53]

Re: Eeprom dump thread!

I have a couple of questions I hope someone might answer. Can the eeprom be read and written too while still on the board or does it have to be removed from the board? Also what blank eeprom chip numbers do we need to keep to be able to program them? Thanks so much for any advice....

David

[comptek]

Re: Eeprom dump thread!

Can anyone point me in the right direction for a uk bush 32" led tv with DVD player built in, firmware for USB update if possible please model LED32DVDW intermittent operation have to unplug and plug back in for it to operate again with the remote thank you

[dick_barton]

Vizio V0370M Dump

Submitted by ayhan yılmaz

VIZIO VO370M
Main board:3637-0502-0150(0G)
Panel LC370WU
FLASH:MX25L3205D
U18

[Zap45]

Re: Eeprom dump thread!

Good afternoon,

i hope i write in correct section.

My blaupunkt tv refuses to power on despite all voltages are present.
So i think i can be a firmware brick!

i'm wondering if it exists a way to re upload the firmware using usb port by using a specif key press in tv buttons or using remote control ?

Many thanks to anyone that can explain me how to do if it is possible.

Otherwise i plan to dismount the eeprom to flash it outside so that i need the eeprom dump.

Firmware for this TV:
main board is t.msd309.btu87 (4k tv)
and panel display innolux v390dk1-ls

see pictures for more details. about my tv set.

Thank you for your help.

[rddube]

Re: Eeprom dump thread!

Here are good, tested working eeproms for a few Samsung TVs. Enjoy.

[mjhera]

Re: Eeprom dump thread!

Hi all, I am looking for an eeprom dump for a JVC LT-32C350
Panel: LC320DXJ-SFE1
Main Board: MS308C1-ZC01-01
Any help would be appreciated

[mjhera]

Re: Eeprom dump thread!

Hi all, here is the firmware for the JVC that I was asking for.

[mjhera]

Re: Eeprom dump thread!

Hi PROTOTYPE-1, Here you go.

[PROTOTYPE-1]

Re: Eeprom dump thread!

Hi PROTOTYPE-1, Here you go.

Thank you very much mjhera

[huzo]

Re: Eeprom dump thread!

hi i'm looking for a dump for vestel 17mb95m , panel is ves390unda 01

the tv is quadro,i tried a few dumps ,but i get only blinking led,one from finlux turns the backlight on,but nothing else...i put a new 25l1606 chip so i'm not sure if i need to flash something else on the chip except for dump?someone mentioned nand flash also?

[mutts]

Re: Eeprom dump thread!

Hello everyone,
I am after an eeprom dump for Toshiba 40L3453DB with mainboard 17MB95 and the panel is a VES400UNDS-2D-R7. The closest to working was with UPG20 files but screen was upside down and remote was no longer recognised. Many thanks.

[boujariss]

Re: Eeprom dump thread!

Merci beaucoup, mon ami

[yohnsee]

Re: Eeprom dump thread!

Hy folks,
my first contribute to this thread:
Blaupunkt B32SHE56TC (known also as 32/56i-gb-1b-hbkup-de)
Mainboard: T.MSD309.B21B, display: LC320WXN SC B1
Eprom: 25Q32

[yohnsee]

Re: Eeprom dump thread!

Blaupunkt BLA-39_68I-GB-1B-FHBKU-DE
Display: V390HJ1-L01
Chip: GD25Q32
Sorry, I can't gather more data on this device, because only the motherboard came to me.

[trata]

Re: Eeprom dump thread!

17mb140

[d2fx]

Re: Eeprom dump thread!

Hello,
I need the dump for coby ledtv3226 please.
panel Samsung LTA320AN01
best regards

[d2fx]

Re: Eeprom dump thread!

here it is for Samsung and lg panel

[d2fx]

Re: Eeprom dump thread!

ledtv3226 coby

[sn4k3]

Re: Eeprom dump thread!

Hello, anyone have the dump for:

Blaupunkt 40/148i-GB-5B-FHBKUP-EU
Chassis: TP.MSD309.BP85
Model: B40A148TCFHD
Product code: BA40I148BFBKPE061

Label on LED screen:
Model: 0040CA001
LSC400HM06

Regards


EDIT:

While searching and try out multiple ROMs i find one compatible with the model:

40/133I-WB-5B-FHBKUP-EU
B40A133TCFHD
BS40I133BFBKPE061

MATRYCA  LSC400HM06
PG TP.MSD309.BP85
PAMIĘĆ 25Q32

Not exactly equal at references but very similar, it works without problems so far.
I will keep testing for a day or two and i will confirm