Announcement

Collapse
No announcement yet.

Can't find video test pin on Samsung PN51F5500AFXZA mainboard BN94-06194A.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Can't find video test pin on Samsung PN51F5500AFXZA mainboard BN94-06194A.

    I have a Samsung PN51F5500AFXZA with 5 blinking lights. main screen comes on and and then vanishes. I checked voltage.. Replaced Power board and Y Main Board LJ41-10317A. Checked continuity on Ybuffer.
    So the only two boards are the main board BN94-06194A and the X MAIN BOARD. When i disconnect xmain. Same blinking issue but no picture.

    Trying to do Video test and cannot find anything close to the pins to short on main board. Pics attached. Mine has a cover on part of the main board.

    Any help would be appreciated.
    Attached Files

    #2
    Re: Can't find video test pin on Samsung PN51F5500AFXZA mainboard BN94-06194A.

    It looks like the bottom of the first photo, right hand side, 4 pcb holes marked 1,2,3 & 4
    Willing to help but I'm no expert.

    Comment


      #3
      Re: Can't find video test pin on Samsung PN51F5500AFXZA mainboard BN94-06194A.

      Thanks,

      Closeup attached. I was looking for something like bigger pins. I believe i have to short 3,4. Do I use alligator clips?
      Attached Files

      Comment


        #4
        Re: Can't find video test pin on Samsung PN51F5500AFXZA mainboard BN94-06194A.

        Use a piece of wire or a paper clip between pins 3 & 4
        Willing to help but I'm no expert.

        Comment


          #5
          Re: Can't find video test pin on Samsung PN51F5500AFXZA mainboard BN94-06194A.

          What's your outcome? Same issue here!

          Comment


            #6
            Re: Can't find video test pin on Samsung PN51F5500AFXZA mainboard BN94-06194A.

            What issue? I'm still troubleshooting but if it's blinking lights then the general fix is replace capacitors on power board. Lots of videos links for that. I tried that and then replaced board but same problem.

            Comment

            Working...
            X