TOSHIBA 55 INCH 55L310U LED TV One year old TV
Power Board pk101w11101
Plugged in this Tv, heard an Arcing sound and everything died.
Opened it up, and found
5 amp fuse blown
U501 (str6069h chopper) had exploded.
Q601 (TK12A50D Mosfet )shorted
ZD503 (16 Volt Zener) shorted
U102 ??? Cant identify
I replaced all these, and fired it up.
Now the hi voltage 160 volts from the diode bridge is working, but otherwise the set is dead.
Found there is no 5 volt startup voltage.. traced the startup supply till it gets lost at U102, a small 6 pin Chip which looks like a tiny regulator which eventually feeds the 5 volts to the 6069h chopper pin 5 VCC.
I suspect this chip is blown, but I cant identify it. no markings visible.
Cant find any schematic or service info on this set, so would appreciate any info on idebtifying this part.
I tried to put an arrow on the picture attached
M
Power Board pk101w11101
Plugged in this Tv, heard an Arcing sound and everything died.
Opened it up, and found
5 amp fuse blown
U501 (str6069h chopper) had exploded.
Q601 (TK12A50D Mosfet )shorted
ZD503 (16 Volt Zener) shorted
U102 ??? Cant identify
I replaced all these, and fired it up.
Now the hi voltage 160 volts from the diode bridge is working, but otherwise the set is dead.
Found there is no 5 volt startup voltage.. traced the startup supply till it gets lost at U102, a small 6 pin Chip which looks like a tiny regulator which eventually feeds the 5 volts to the 6069h chopper pin 5 VCC.
I suspect this chip is blown, but I cant identify it. no markings visible.
Cant find any schematic or service info on this set, so would appreciate any info on idebtifying this part.
I tried to put an arrow on the picture attached
M
Comment